I hadnt used the welder for a while and started welding a quick job .. only using current setting 2 ..all went fine for a couple minutes , then the wire feed slowed and the current dropped as the wire just glowed red, the gas was still feeding .
After a few more operations I could hear the main contactor operating but the wire feed had stopped and an arc couldn't be struck. Changing the settings made no difference .
Measuring the gun to earth voltage was producing 20v dc.
Any suggestions where to start would be appreciated.
After a few more operations I could hear the main contactor operating but the wire feed had stopped and an arc couldn't be struck. Changing the settings made no difference .
Measuring the gun to earth voltage was producing 20v dc.
Any suggestions where to start would be appreciated.