Airmaster 14/60 compressor wiring

[Stuart from Ilfracombe]

Hi everyone, I have been given an airmaster tiger 14/60 that was constantly blowing fuses, someone had taken the motor off and disconnected the wires to the block connector(capacitors and thermal overload etc), it was immediately apparent that the pistons were seized so I stripped it down and one had been running with no filter and was full of crud after cleaning it is moving perfectly and I presume the motor will be fine. I'm fine with basic wiring but this has me stumped, please could you show me a picture of the wiring or a drawing?
Thank you in advance, Regards Stuart from Ilfracombe.
P.S. I learned to weld as a boy growing up on Exmoor and still believe that 99% of problems can be fixed with a hammer, welder or binder cord!

 

[rtbcomp]

Welcome to the forum.

The manual doesn't show the wiring, but if you want to download it anyway Google "airmaster 14/60" and there's a link near the top to download the PDF.

 

[Stuart from Ilfracombe]

Hi rtbcomp thanks for your swift reply. I've already had a look at the PDF and there was nothing helpful on Youtube or anywhere else on the net either, fingers crossed someone on here has one and will pop the cover off and have a look for me, worst case scenario I suppose I could try E-mailing machine mart the retailers or Clark the manufacturers.

 

[MattF]

Put a photo up of what you have. Someone may be able to tell you what goes where by looking at it.