Airmate Hurricane 24525

[happytriger2000]

Hi,
Joined in this forum couple minutes ago.
I have an Airmate Hurricane 24525 and I would like to set the cut-out at 8psi, would anyone provide some guidance?
Picture of the compressor switch:






Is it the tension of the spring that I have to adjust?

This is the closest pdf I could find:
http://www.sipuk.co.uk/media/uploads/06296-Hurricane-245-25.pdf

 

[rtbcomp]

Tighten both those nuts on top of the springs by the same amount to increase the cut-off pressure, slacken to reduce.

You said 8 psi, do you mean 80 or 8 bar? I doubt whether the pressure switch will work down to 8 psi

 

[happytriger2000]

Hello rtbcomp,
Sorry it is 8 BAR not psi. Currently it is over 8 Bar, and I want the Cut-out = 8 bar, so un-screw (anti-clockwise) will reduce the presure, correct?

 

[happytriger2000]

Oki-doki, solved, cut-in @4bar, cut-out @6 bar.
Thanks,