- Thread starter Gragson
- Start date
Agroshield
Member
- Messages
- 5,662
I think it is called 'balata flat belt' or 'balata flat belting'. You will need to look at how to join it together - whether a sewn joint, scarfed and glued or alligator clip and pin.
Need width, thickness and circumference.
Need width, thickness and circumference.
Agroshield
Member
- Messages
- 5,662
I have also read that a standard poly-vee belt can work acceptably on crowned flat belt pulleys.
OK, found it. Pay attention to Pete.'s comment about washing machines:
OK, found it. Pay attention to Pete.'s comment about washing machines:
Flat belt drive system
i want to get my Holbrook 5P lathe up and running - it has a 3 wheel (4,5,6 inch) flat belt pulley on the headstock Various insurmountable issues (lack of ceiling height + a built in thread chaser headstock) means that the drive has to be underslung, and if a "simple" mechanism, would involve...
www.mig-welding.co.uk
- Messages
- 22,544
- Location
- Birmingham
A C Belting I normally deal with a chap called Jason, done some flat belts for my stationary engines.
Thanks a lot for all the replies guys 
The original is a 23mm wide x 2.5mm thick tough woven fabric belt, ends are sewn together. Has never slipped, the tensioner and pulleys on this drill are very good tho without having to over do it.
Ideally I need it 1150mm long. TBH I would prefer the same type material which I could cut to size and stitch up.
My old mum has stitched canvas sails to wedding dresses, leather boots & jackets - at one point me and my brother had to tell her to stop making us stuff as although they would survive a nuclear war they were not very trendy
at 91 she can't sow to well anymore but will be able to **** me round the head if I don't darn the joint tough enough.
I will give bearing boys a call as first option - thanks again gents
The original is a 23mm wide x 2.5mm thick tough woven fabric belt, ends are sewn together. Has never slipped, the tensioner and pulleys on this drill are very good tho without having to over do it.
Ideally I need it 1150mm long. TBH I would prefer the same type material which I could cut to size and stitch up.
My old mum has stitched canvas sails to wedding dresses, leather boots & jackets - at one point me and my brother had to tell her to stop making us stuff as although they would survive a nuclear war they were not very trendy
at 91 she can't sow to well anymore but will be able to **** me round the head if I don't darn the joint tough enough.I will give bearing boys a call as first option - thanks again gents
Pete.
Member
- Messages
- 14,566
- Location
- Kent, UK
What was the purpose of that?
Poverty, she made her own wedding dress and her cousins as pretty talented at it and did not have a pot to p in. And fixed fis boat sails on the straights in the day
But not sure if thats your point?
Bearing Boys have suggested this https://www.bearingboys.co.uk/Flat-Belts/T150119023-Megaflat-Flat-Belt-398806-p
But its endless and too long so I would have to cut and rejoin, not too sure about that being polyester ?
But its endless and too long so I would have to cut and rejoin, not too sure about that being polyester ?
not done it yet
Member
- Messages
- 2,619
- Location
- Lincs/cambs/Rutland/Northants
I use my local belt/bearing supplier. I use ABC in Peterborough.
julianthegypsy
Member
- Messages
- 4,251
- Location
- Cirencester
I think he was wondering why you'd sew a wedding dress to a sail, maybe the sail was a bit small and needed a bit extra?
