Can't find specs on these...

[manicman]

Hi guys,
I've just taken delivery of these today and I've searched the compair website and t'internet to no avail. I wondered if anyone may be able to help as I'm hoping it'll be OK for my blasting setup?
The compressor is a compair easyair e45 and the dryer is a compair f9t?

Thanks in advance

 

[rtbcomp]

http://www.ccminterpressure.com/Default.aspx?pageid=200

http://www.usedsandwell.co.uk/classified-ad/Easyair-compressor-_24824036

Looking at the photos in the above links there should be a rating plate below the pump.

 

[manicman]

Unfortunately this is all it says

 

[rtbcomp]

That's all you need to know about the compressor.

It's 3 phase 10HP - that's industrial stuff, you'll need a hefty three phase supply to run it. That said it would be just the job for your blasting!

 

[penfold]

10hp should be netting you 25-30 cfm as a conservative guesstimate ballpark figure.

 

[carbon]

Pump looks like an abac B7000 2 stage pump as that is rated at 10hp and the intercooler pipe matches the one in abac's parts list. If it is the pump is rated at 42.7 cfm so fad hopefully is above 35 cfm