Hi guys.
Having a little trouble with my cebora boxer 155 twin.
It's been a great set for a few years now but it's playing up a little.
Last time I used it was welding up some box frames so I had it running pretty much flat out, not for hours though.
Now I've started it back up after not using for a few weeks and I'm back in to car body stuff so only ever use the first couple of settings. It's over running on the wire feed slightly so the wire is getting stuck to the job, it always previously burnt back and maybe a little to much. Also it on the lowest setting it seem to be to hot.
I've taken the trigger apart and cleaned and cleaned out the inside of the machine and checked for any obvious problems but all looks okay.
Any input would be very much appreciated.
Cheers
Karl
Having a little trouble with my cebora boxer 155 twin.
It's been a great set for a few years now but it's playing up a little.
Last time I used it was welding up some box frames so I had it running pretty much flat out, not for hours though.
Now I've started it back up after not using for a few weeks and I'm back in to car body stuff so only ever use the first couple of settings. It's over running on the wire feed slightly so the wire is getting stuck to the job, it always previously burnt back and maybe a little to much. Also it on the lowest setting it seem to be to hot.
I've taken the trigger apart and cleaned and cleaned out the inside of the machine and checked for any obvious problems but all looks okay.
Any input would be very much appreciated.
Cheers
Karl
