Cebora Pocket Turbo 130 Rotary Switch

[MAC_Tool_WS1300]

Hi,

I have a MAC Tools WS1300 (Same as a Cebora Pocket Turbo 130) that has been working well until the other day when the rotary power switch started to get tough to turn. I got a little over ambitious and attempted to take the switch apart to fix it - bad idea. Needless to say, when I got the screws out, some springs sprung and I didn't get a chance to see how the parts went together before they were on my table top. I do have all of the parts and I think I have it back together correctly but I would like to make sure before I put it back into my machine. Does anyone have an assembly schematic or at the very least know which leads have continuity at each of the switch positions? If it turns out that I can't fix it, does anyone know of a supplier that might have a replacement switch? Any help would be greatly appreciated. There is not much information about these machines here in the US. Here is a link to an album of pictures of the welder ad the switch.

http://s1215.photobucket.com/albums/cc515/ty13rf/Welder/

Thanks in advance for the help...

 

[MAC_Tool_WS1300]

I was able to figure out the continuity of the terminals for each position of the switch and figured I'd share the information just in case anyone else had the same problem. Here is a link to the info:

http://i1215.photobucket.com/albums/cc515/ty13rf/Welder/Switch.jpg