Hi all, hoping someone can help me out , I,ve a cebora 160 its an old machine but used to work well however it will not now work on pos 6 . Pos 6 off the rotary switch goes to the bottom of the 3 thick plates, not sure of the name for this, pos 12345 are going to the transformer. The tricky bit is I have robbed a rotary switch from a mate,s duff mig which is a 6 pos switch but it only has 5 positions on the new switch , old switch also has pos C which goes to one of the 2 capacitors ,new switch has no pos C. Another difference is old switch has pos SL2 whitch goes to the contactor on new switch I,ve got RL1 same as old switch R1, N1 and N. I,m confused to say the least would appreciate any help, I know its a box of frogs when I aint in front of you, but I live in hope, thanks for taking the time to read this, regards Rob
