Clip on label holder.

[ukracer]

On the basis that everything thing exists you could 3D print I looked for a lebel holder to fit bale are crates.


Guess what I can't find anything. I know some of you guys seem to fair better than me on Google can anyone find one.

Essentially I need a clip on piece of plastic that has a flat piece 4 x 3 or 102 x 76mm where I can stick a label.
I would like to use 2 or 3 holes to clip into so as I move the contents I can move the clip on label.

 

[ukracer]

Looks like they don't exist then.

 

[ajlelectronics]

Looks like they don't exist then.

Straightforward to draw, Shirley?

 

[selectedgrub]

I got a stack of similar but better fruit crates for a future project.
Although they have slots for a card tag I'm going to use ruc document holders.
The 4 x 2 ones, Will replace the bolts with wing nuts.

 

[8ob]

Double sided tape on one of these?

Adhesive Ticket Holder

Self adhesive ticket holders allow you to display product information anywhere. The adhesive ticket holder pockets have a side opening for label changes.

www.ukpos.com

 

[ukracer]

Straightforward to draw, Shirley?

Not for me. Lol

 

[Agroshield]

Not for me.

Tell us height and width of the holes in the crate plus horizontal and vertical gap between holes as well as thickness of side (5 numbers). That would give us something to start with. Gives more design freedom if you can guess at radius in corners of holes, but not critical.

 

[MattF]

Adhesive labels too common for you? Change the contents, whack a new label over the old one.

 

[ukracer]

Adhesive labels too common for you? Change the contents, whack a new label over the old one.

I will be using adhesive labels. Just neater this way.

 

[ukracer]

Tell us height and width of the holes in the crate plus horizontal and vertical gap between holes as well as thickness of side (5 numbers). That would give us something to start with. Gives more design freedom if you can guess at radius in corners of holes, but not critical.

Will be able to measure up Monday.