coil air line

[123hotchef]

I am after the above not a rubbish plastic one like I got with a kit frow screwfix something a bit nicer quality that will last to keep in the truck bed to use with my on board air system

was looking at this but not sure on quality http://www.ebay.co.uk/itm/PCL-2-5MT...307669&hash=item2efe56f5d3:g:nrMAAOSw32lYtEFw

and it is too short

 

[armalites]

Judging by the price/spec nylon seems to be the best

http://www.airlines-pneumatics.co.uk/pneumatics/tubing-and-hose/recoils/38

 

[123hotchef]

Judging by the price/spec nylon seems to be the best

http://www.airlines-pneumatics.co.uk/pneumatics/tubing-and-hose/recoils/38

thank you very much that is the kind of thing I want to hear I was looking at PU

 

[armalites]

I would give them a ring, the PU is described as having excellent resistance to abrasion. I was only going by the prices.

 

[rtbcomp]

I've used that firm a few times, good service.

 

[123hotchef]

is this going to be carp?

http://www.ebay.co.uk/itm/SILVER-20...469460&hash=item3d24ba9fc6:g:KXgAAOSwFdtXzBgT

 

[Gareth0123]

I use a 20ft Yellow (paint gun only), 20ft red (filtered and lube oil tool line) and a 20ft Blue (double filtered for Plasma cutter, tyre inflator and blow gun only) coiled air hoses from Machine Mart on a daily basis............ I think the airlines are 4 years old now. The much used yellow one has fatigue broken off a couple of times at the fitting but is repaired using a trimming knife to square off the end and then pulling spring shroud back in place ....... less than 1 minute to do.

 

[123hotchef]

I use a 20ft Yellow (paint gun only), 20ft red (filtered and lube oil tool line) and a 20ft Blue (double filtered for Plasma cutter, tyre inflator and blow gun only) coiled air hoses from Machine Mart on a daily basis............ I think the airlines are 4 years old now. The much used yellow one has fatigue broken off a couple of times at the fitting but is repaired using a trimming knife to square off the end and then pulling spring shroud back in place ....... less than 1 minute to do.

cheers i will take a look on MM later