copper pipe to 1/4" bsp

[geoffdown]

Can someone point me in the right direction please I want to run 15mm copper pipe around my work shop but can't find a fitting that goes from 15mm copper pipe to 1/4" bsp for the quick release couplers what r people using thanks.

 

[rtbcomp]

Use a 15mm compression coupling to fit on the pipe and then a 1/2 in bsp quick release.

If you have to use a 1/4 bsp quick release you need a 1/2" X 1/4" BSP female-female reducing socket.

http://www.pipefittingsdirect.co.uk/contents/en-uk/d7.html

 

[jonjoe]

https://www.google.co.uk/#q=cas15bsa&hl=en&rlz=1C2GGLS_en-GBGB348&source=lnms&tbm=shop&sa=X&ei=8vsoUZDHDenH0QWp-4DAAQ&ved=0CAkQ_AUoAw&fp=1&biw=1280&bih=685&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.&cad=b

http://hardware.j4outlet.co.uk/Draper-25867-12-quot-Female-To-14-quot-Female-BSP-Parallel-Reducing-Union_i117643

 

[rikrobson]

i thought b&q sell them. sure i got some there

 

[rtbcomp]

Some B&Q fittings have non-bsp threads, I've used fittings from Wickes & Screwfix without problems.

 

[geoffdown]

Some B&Q fittings have non-bsp threads, I've used fittings from Wickes & Screwfix without problems.

would this work
http://www.toolstation.com/shop/Plumbing/End+Feed/EF+WP+Coupler+15mm+x+12/d20/sd2698/p83983

 

[rtbcomp]

Should be fine, you can get a reducing bush to go from 1/2 to 1/4, you'll need a male thread on your quick release fitting.

 

[geoffdown]

Should be fine, you can get a reducing bush to go from 1/2 to 1/4, you'll need a male thread on your quick release fitting.

cool thanks will get some weekend

 

[kevron]

Hi geoffdown,
just wondered if you got sorted with the copper piping, I became a member today and was reading thru the threads, I did the same as you in my workshop I got these fittings from ebay

http://www.ebay.co.uk/itm/Brass-15m...423&pid=100033&prg=1011&rk=3&sd=221194582274&

and these ones

http://uk.rs-online.com/web/p/brass-copper-compression-fittings/2038653/