Help choosing compressor and spray gun

[chenga]

Hi I'm new here and have been reading on many threads. I want to spray things like a bumper and I'm looking to get a compressor and spray gun. I have found the following:

Compressor - MonteCarlo one
http://www.airsupplies.co.uk/workshopaircompressors.php

Spray gun
http://www.spraygunsdirect.co.uk/product.php?tid=79&products_id=2102

These are the ones that I can afford right now and I won't be using it for anything else other than maybe a sander or inflater.

I want to know a few things
1. Would the compressor be alright with the gun?
2. How much will I be able to spray before it runs out?
3. Do I need anything else other than the compressor and gun?

Also I have found this low air consumption spray gun and was wondering if it was suitable for my needs. If it is, does that mean that I can use less powerful compressor? I'm not to bothered about air tools.

http://www.spraygunsdirect.co.uk/product.php?tid=79&products_id=6399

 

[pedrobedro]

The compressor will drive a gravity gun easily enough but there are a lot cheaper guns than Devilbiss if you only want occasional use. If you are spraying at 40-50psi the compressor will probably fill the tank while you are spraying, I have a SIP one which does with my Sealey gun at 40psi. You will need a regulator/separator to clean the air from the compressor on it's way to the spraygun. I would not skimp on the compressor tank size if at all possible, 50 litre is a reasonable minimum but bigger is better.

 

[spaffmonkey]

You would also need hose and possible the conectors to join it all up.

I got my deVilbiss sri gun and gun cleaning kit from this company very good service and speedy delivery i would use the again. and also they were one of the cheapest for the sri.
http://www.spraygunsdirect.co.uk/product.php?tid=79&products_id=2102

I have the GTI which is the normal size got if your doing big panels.
And the SRI is classed as a touch up gun but i use this all the time for spraying my model boats and did use it for respraying my bumper on van and its great.

After ive used the gun for a while before i pack it away i drop a few drops of air line lube down just to keep everythink working smoothly.

Hope thats not to much info

 

[chenga]

Thanks for the replies guys.
I dont think ill get a bigger tank than 50l as i dont really have the space.
The deVilbiss gti one is too expensive but i may get one in the future. Can someone recommend me a spray gun? One around £80, HVLP and suitable for my compressor.

I have seen many that uses 11 CFM or above and those that are below are too expensive. Is this one of the reasons why DeVilbiss cost a lot more than others as they use a lower pressure?

Would the low air consumption one be ok for what i need?

Edit: Just did a search and it seems that it is not the usually Devilbiss quality and there are no spares.

 

[chenga]

Thought I'll update this thread instead of making a new one.

I was originally going to get a compressor for the summer but something came up meaning I couldn't. I am now thinking of getting one for when it gets warmer and need some help.

I have looked around for a different compressor than the one in the first post and found this:
Compressor

What do you think of this compressor? to go with this gun: Gun

50 litres is the biggest I can have as I don't have the space for any bigger.

 

[leeruddock]

if your just occasionally spraying i have got a Kestrel Touch Up Spray gun 1.0mm set up and a Kestrel Gravity Spray Gun 1.8mm set up. You can have both for £70 plus carriage. If youre interested they will do any job you like.