Hi from Devon

[Steveaxwhm]

Hi, From North Devon.........
I'm afraid I have a problem with my Cerbora 185........Its stood unused for about a year, in a dry shed,I ran out of gas...could'nt afford a new bottle til now....It turns on,the fan is running but nothing happens when you use the trigger....the temperature warning light is on,I've checked the wire connections in the handle and where it joins the 'thingamajig and everything seems fine ......Any assistance will be greatly appreciated....Cheers

 

[frame69]

Hi there from North Cornwall.

Frame.

 

[Robotstar5]

Welcome to the forum, sounds like a problem with the temperature sensor normally mounted on the rectifier heat sink ( big aluminium plates).
Unplug from mains, remove covers and look for a small round sensor with 2 wires normally connected by spade (Lucar) connectors, remove and refit a couple of times to ensure good contact. If that doesn't work, temporarily short the 2 wires together, if welder now works you need a new sensor.

 

[Jim_gsxr1000]

Hi from Scotland, currently in sunny Tunisia