In need of manual for Dayton 6Z925D

[Flash3471]

Hi everyone i'm new to the forum and need to see if ya'll can help me find a manual for a Dayton 6Z935D 90 amp gasless wire feed welder i got it to do a little body work on a classic truck any help would be appreciated

 

[shenion]

Welcome from GA

What do you need a manual for, most are self explanatory.

Gasless will be hard to use on bodywork.

 

[Flash3471]

just gonna use it to replace the rocker panels on a 69 chevy i just purchased just want the manual for the parts list and for future resell on ebay

 

[shenion]

The tutorials here should be all you need.

You will have to stitch-weld using gasless wire. See if you can find some 0.030 wire, the 0.035 will probably just blow holes.

Post some picks of the welder. Maybe someone will recognize it as a rebranded one.

 

[Flash3471]

Hey I appreciate that I'll get the pics up a.s.a.p just gettin started with this already got .30 wire it had three rolls when i got it from the old guy hey only got 60 bucks in it