Lorch 220 AC DC TIG manual

[davidjohnperry]

Hey guys I have a interview on Friday for a welding job welding ally wanna try and change my fate if that's possible I spoke to the lad what machines they run and it happens to be these I'm not much of a TIG welder just want to get a little more knowledge on the machines

 

[Hood]

@matt1978 should be able to help you out with a manual.

 

[Hood]

Hope the interview goes well for you

 

[davidjohnperry]

Cheers for that buddy

 

[Member 32799]

https://oxomi.com/p/2024590/search?selection=brand_QJL6L7ICRJHFB3MA2KGBH7AMQ8

 

[davidjohnperry]

Cheers for that but I think it's in german

 

[Kent]

Cheers for that but I think it's in german

Never mind there was talk about German being the language of buisness around the world a liitle while back

 

[Member 32799]

put In the serial number and you can get every manual

http://partner.lorch.biz/Default.aspx

 

[Tigman]

Ja ziehen sie den anderen

 

[davidjohnperry]

Don't own them buddy so kinda improbable that I'd get them

 

[Richard.]

Hello David
Mate send me your email via pm and I’ll get you a user manual over.
This machine couldn’t be simpler .You have your processes bottom left and right which you select with the buttons right next to them ie 2T, 4T, ac , dc, sticks etc.
Then at the top you have a nice clear grid illuminated with an led to show what your changing. In ac you just keep scrolling with the arrow key and you’ll get AC frequency and balance settings. Good idea to swat up on its usage. Don’t get involved with the back menu as there will be nothing in there you’ll need to alter for a weld test.
Personally I’d just go with what I know works for most stuff and keep it simple.
Balance at 30
Frequency at 100
Set a 2 second downslope because leaving a crater isn’t good. If it happens just fix it don’t leave it.
They are not going to expect you to be a wiz kid on the panel so if you get stuck don’t just go with whatever is set, ask them to show you how to change a certain setting. Nothing wrong with that at all. Shows you know what it needs to be set at.
Very best of luck with the test.

 

[davidjohnperry]

@Richard. Cheers for that along with the good luck. I'm just trying to work every advantage I can get due to I do very little TIG. But I feel if I can get a little knowledge about the machine I've got a little more chance in setting the machine I hope they give me a few test set up plates also

 

[Richard.]

@Richard. Cheers for that along with the good luck. I'm just trying to work every advantage I can get due to I do very little TIG. But I feel if I can get a little knowledge about the machine I've got a little more chance in setting the machine I hope they give me a few test set up plates also

You do have to send me the email address though Dave in order for it to work

 

[davidjohnperry]

Sorry buddy I'm all over the place right now

 

[davidjohnperry]

I must of missed that this morning I was reading the information on settings and stuff as said all over the shot