MSB Blocking constantly

[darrendee09]

As above, it'l go for only a second or two when turned of for and hour or so and left, only got it yesterday and had the problem since its first run, so will still come out of the clear silicon pipe when you open the valve with the black lever, when i strip everything down i cant find any blockages, the air is still coming out of the nozzle at the same force, so im thinking that the soda must be damp and turning to small lumps, below is a picture of the bottom of the pot, if it is the soda is there anyway of drying it out so to speak?
any help much appreciated, thanks again

 

[rtbcomp]

How much media have you got in the pot? When they get near empty they need a bit of a shake to get them going again.

 

[brightspark]

empty the lot out. spread the soda about dry with fan heater or whatever make sure the pots dried out as well . try some through a fine sieve if it all falls through its dry enough if it doesnt it isnt make sure your water seperator is clearing any water colected , any moisture what so ever is a looser

 

[darrendee09]

How much media have you got in the pot? When they get near empty they need a bit of a shake to get them going again.

its about 1/4 full id say, i didnt want to fill it up as its awkard getting it out again,

il try drying it out,
for the short second or so it was going it seemed to do a grand job, granted its only a square cm or so

 

[mike os]

these are a pita to set up ime... once you get the nack its not so bad.

main thing for me is air flow through gun before opening sand, sand only on a little & must be bone dry

 

[darrendee09]

these are a pita to set up ime... once you get the nack its not so bad.

main thing for me is air flow through gun before opening sand, sand only on a little & must be bone dry

so not just open up all the valves and hope for the best lol

 

[mike os]

so not just open up all the valves and hope for the best lol

not in this case ime

 

[darrendee09]

let me get this right, i only open the valves to fill the tank and at the nozzle at the end of the hose completely, then i play about abit with the valve at the bottom of the pot? lol

 

[mike os]

thats it, open the top then have a fiddle down below

 

[darrendee09]

thats it, open the top then have a fiddle down below

il try my very best, althought im not sure what excatly you were refering to there

 

[brightspark]

thats it, open the top then have a fiddle down below