Hello all,
I'm going to buy a new compressor in Jan and it will probably be something along the line of the wolf 90l bet driven ones ( http://www.ebay.co.uk/itm/252417619070?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT) - It will be used for mostly air tools for home use.
Now i've read quite a few threads on here that suggest swapping out the 1/4 fittings for 3/8. So with that in mind (assuming it is good advise). Is there anything that I need to swap out straight away on the compressor itself to enable 3/8 air passage through to the tools?
I guess what i'm asking is for a dummies guide to setting this up correctly in terms of required hardware. I'm sure once I have the thing in my garage it will all make sense, it's just when setting out to buy the h/w it seems alittle cloudy as to what I actually need to buy
Thanks in advance for any help
I'm going to buy a new compressor in Jan and it will probably be something along the line of the wolf 90l bet driven ones ( http://www.ebay.co.uk/itm/252417619070?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT) - It will be used for mostly air tools for home use.
Now i've read quite a few threads on here that suggest swapping out the 1/4 fittings for 3/8. So with that in mind (assuming it is good advise). Is there anything that I need to swap out straight away on the compressor itself to enable 3/8 air passage through to the tools?
I guess what i'm asking is for a dummies guide to setting this up correctly in terms of required hardware. I'm sure once I have the thing in my garage it will all make sense, it's just when setting out to buy the h/w it seems alittle cloudy as to what I actually need to buy
Thanks in advance for any help
just buy it and use for now u can fit ahalf inch bsp filter regulator to the side of your tank and use high flow couplings and 10mm bore hose