NOx sensor Berlingo

[Hood]

Anyone know for sure if replacing a NOx sensor on a 2018 Berlingo requires hooking up to a diagnostics device and doing a calibration routine or not?
I have searched around and some say it is required and others have just replaced the sensor and nothing else.

 

[JOEPRO]

Not familiar with that particular make.

But generally you just replace the sensor. Any check engine light on some models like JLR group do require about 80 miles of driving with good data before they will reset themselves.

So replace, and drive at least 100 miles and any live errors should go away themselves most of the time.

 

[Hood]

Not familiar with that particular make.

But generally you just replace the sensor. Any check engine light on some models like JLR group do require about 80 miles of driving with good data before they will reset themselves.

So replace, and drive at least 100 miles and any live errors should go away themselves most of the time.

Thanks, I can easily delete the error with the OBD dongle and the Torque app.
Some videos show them going into the diagnostics tool menus and choosing that a replacement NOx has been fitted and to do the calibration setup whilst others just show them replacing the sensor and that is it.
Suppose I will have to give it a try and see what happens.