Pel Job ED750 brakes and propshaft

[weldvandal]

Trying to find some brake shoes and slave cylinders for the dumper i have got but i am not getting anywhere fast
it use's newage 100rf axles with outboard drums hydraulic with handbrake cable around 220mm in diameter 40mm wide anyone know where to get some or possibly car shoes that will fit?
Also trying to find a newage g2000 transfer box output flange and the front propshaft anyone got anything or any leads?

 

[frank horton]

Brake shoes and "wheel cylinders" should not be a problem....
obvious u want to avoid the dealer....!!!!
the brake parts will be from some Transit sized van but Reno or the like.....
look for a brake repair/reline place...to get the shoes relined.....and if u give them the dimensions of the piston in the wheel cylinder plus a photo ur 1/2 way there....
heres one I've used in the past.....johnautoandindustrial@fsmail.net 01462834778 hitchin, Herts....

look thru old car forums etc there will be quite a few firms all over the country doing that very job.....

also look for industrial clutch reline / rebuild...most of them will do brakes as well...
I cant find the guy's I use in Yorkshire at the mo.....

 

[Melvyn Best]

Bailey Morris in St Neots might be able to help with the prop, other prop shaft manufacturers are about

 

[RonA]

Trying to find some brake shoes and slave cylinders for the dumper i have got but i am not getting anywhere fast
it use's newage 100rf axles with outboard drums hydraulic with handbrake cable around 220mm in diameter 40mm wide anyone know where to get some or possibly car shoes that will fit?
Also trying to find a newage g2000 transfer box output flange and the front propshaft anyone got anything or any leads?

Quite a few firms offering to reline brake shoes, others will resleeve brake cylinders & master cylinders. Buy yourself a copy of Practical classics magazine.
RonA

 

[500e]

Trying to find some brake shoes and slave cylinders for the dumper i have got but i am not getting anywhere fast
it use's newage 100rf axles with outboard drums hydraulic with handbrake cable around 220mm in diameter 40mm wide anyone know where to get some or possibly car shoes that will fit?
Also trying to find a newage g2000 transfer box output flange and the front propshaft anyone got anything or any leads?

Chards of feeder road in Bristol

H J Chard engineering

Manufacturer of Prop shafts in Bristol

h-j-chard-engineering.business.site

These might help with other bits
simon@handelingtruck.co

 

[weldvandal]

thanks guys for all the suggestions looks like i could adapt some shoes of the same width and diameter with relining an option too.
i will keep looking for the wheel cylinders have seen a few for next to nowt on ebay that might match(worth a punt)
i've seen another forum member has posted about the propshaft and the fix http://www.mig-welding.co.uk/forum/threads/pel-job-ed-750-cv-joint.49290/
only trouble is a previous owner has removed my dumper's propshaft and transfer box output flange so i have nothing to work with until i can find those bits hoping someone has some kicking around somewhere

 

[500e]

Talk to Chards they have pointed me at bits before now