Portable sandblaster

[sprayerDrew]

Hi guys i know this has cropped up a lot but before i jump in and buy a sandblaster i thought you could point me in the right direction. i have a 3hp compressor and a 2hp linked to it.
I have been looking at the predator ones on flee bay. What i want to know is what is the best type i can get, i arent going to be doing big areas like a car shell but id like one that has a wide use range. I dont want spen a fortune as i have made this misteak before with the frost dual soda blaster and i wished i had researched more about them first.
Thanks in advance

 

[brightspark]

there all much about the same but badged up under someone elses banner and priced acordingley clarke presuirised pot ones are 145 quid but ive seen the same at autojumbles for 95 and theres no diffrence whats the number on ebay ??

 

[sprayerDrew]

http://cgi.ebay.co.uk/PORTABLE-SAND...Air_Tools_and_Compressors&hash=item5d2af7e1e0
ebay number

 

[brightspark]

http://cgi.ebay.co.uk/PORTABLE-SAND...Air_Tools_and_Compressors&hash=item5d2af7e1e0
ebay number

thats a suction type gun there hopless presurised pots the best should be able to pick one up for 100 quid ish new they use a 3mm jet and can be used with j blast superfine or dare i say it kilndried sand WITH ADEQUATE FILTER MASK but it isnt as abrasive they will run on 12 to 19 cfm volume

 

[rtbcomp]

I use one of those pressure pot ones with 3hp & 2hp compressor linked. Use J-Blast Supafine or glass grit, look in the Links section for technical data and suggested suppliers.

 

[brightspark]

blast pot

theres a 20 gallon one on ebay 118 quid delivered they do a smaller tank 10 gallon one as well but both same jet size item no 370409550960

 

[michael1703]

get a decent sealable suit, nothing worse than grit in your **** crack