Portapower Fittings

[Paul The Pie Eater]

Hi all, I think this is the right place for this post but if it isn't, please forgive me. can anyone tell me where I can get a female fitting for my Portapower? What I am after is the screw on type fitting as fitted to the ram/spreader (not the pump). It has an outside diameter of about 1" (25mm) and screw connects to the pump. Any help pointing me in the right direction would be appreciated.

 

[zzr1200]

I obtained my last one from Pirtek but any of the Hydraulic Factors should be able the supply one or order one for you...

 

[normspanners]

I struggled to get one from hydraulic supplies I got mine from a sealey agent it was quite cheap I think about £6-8 but I cant remember the part number .

 

[dan.taylor.1]

Just watch as a lot of these portapack jobbies are 700 bar and a lot of hydraulics are only 300 rated.

Dan

 

[Paul The Pie Eater]

Eeee, sorry folks. I had forgotten about this post. Must have had a few shandy's when I posted this. What it is, I have received an [Enerpack RC50 mini ram and was hoping to use this on the portapower. The fitting on the Enerpack is a bigger size than the Portapower. The plan is to swap the Enerpack fitting for a Portapower fitting. Is there any problems with doing this?

http://www.ebay.co.uk/itm/ENERPAC-RC50-HYDRAULIC-CYLINDER-/141077300042