Replacing broken part on air compressor

[Munch]

My air compressor has blown some sort of pipe/wire today but not sure exactly what it is to find a replacement. I have attached a pic below hopefully someone can help
https://imgshare.io/image/NpVTXt
https://imgshare.io/image/NpVq5l

 

[anjum]

Something like this https://www.ebay.co.uk/itm/Flexible...hash=item23d3734bb9:m:mtmhoJ8Sbf_mBcIHjll3P9Q

(probably 6mm) and check your connectors are reuseable.

or pick form here https://www.ebay.co.uk/itm/High-Pre...hash=item3b0101629e:m:mTjqv7BNHXToOHRpxuZ0pXA

 

[chris pruteanu]

It's the unloader pipe. As above, the coupling is usually a quick fit plastic fitting on modern pressure regulators or a threaded brass nut on older machines with a brass/copper olive to seal...look for ordinary air line for automotive as it will be suitable...It sells by few meters coils but maybe you fan find a small offcut!

 

[Munch]

Thanks for the replies. I'm a bit confused to exactly what I need to buy, I know I definitely need a new hose but dont understand the fitting, I removed the end that was still fixed to the compressor and when removed I understand how that works however I cant get the copper piece that holds the hose off the hose. Does this mean I need a new fitting?

The end that blew off the piece that should hold the hose seems stuck inside the compressor. Any ideas?
https://imgshare.io/image/Nr6r87
https://imgshare.io/image/Nr6weg

 

[Seadog]

That the olive. You can't reuse it so try to deform it inwards and get a pair of needle-nosed pliers on it. Be careful not to damage the thread. Possible screwing a woodscrew of the right size may give you enough purchase to wiggle it out.

 

[Munch]

Ok I'll try to get it removed.

I've looked at the ebay link above but there are a lot of options and I havent really got a clue. Does anyone know the name of the exact fittings I need?

 

[Munch]

Local shop sorted everything I need for under a tenner! Just have to get this olive out now

 

[Munch]

Another part needs replacing.. I have attached a pic below. It's not the best picture sorry! It sits on top of the tank and it's what the hose in the original post connects to.

https://imgshare.io/image/20200529-112345.Nr7Ls5

 

[eddie49]

That is the check valve or non-return valve. It lets air from the pump into the tank, but not back. E.G.:
https://www.ebay.co.uk/itm/Air-Comp...-Valve-Connector-Tool-Use-Supply/293030718812