Respirator filters nla?

[Matchless]

So I made a rash auction purchase of an MSA Optimair 3000p belt mounted air fed mask, in fact there were 3 sets, all batteries have charged up, but so far I am struggling to find filters, I am getting the impression that they may be discontinued, currently I don't really have anything so this is a big step up for home use, mainly for grit blasting, rust removal and body filler sanding, plus a bit of paint spraying, there is one pair of used particle filters so I have dimensions and even housings I could use to adapt something else, has anyone come across this issue of filter supplies? the filters are around 11cm across, depth is not an issue as I have many slim and deep caps,

 

[chip]

A quick google, there a bit pricey I just pulled the top search result https://www.cromwell.co.uk/shop/per...lX7pHj6pbhRP7uy1FkOnl3fWFujMGbV8aAtAhEALw_wcB

 

[gaz1]

with a bit of plastic glue you could adapt what you have to cheaper filters

or even get someone to print you the cartridge with smaller round filters

 

[Mart63]

Zoro have the particle filters, a bit spendy though. https://www.zoro.co.uk/shop/safety/...MIjJ3GvL_viAMVQJdQBh2TQhwWEAQYASABEgIZdvD_BwE

 

[Matchless]

with a bit of plastic glue you could adapt what you have to cheaper filters

or even get someone to print you the cartridge with smaller round filters

Yes had thought of that, my son has a 3d printer..... and so does my future son in law....

 

[Matchless]

Zoro have the particle filters, a bit spendy though. https://www.zoro.co.uk/shop/safety/respirator-accessories/optimair-3000-particle-filter-pack-of-10/p/ZT1405617X?utm_source=google&utm_campaign=pla+|+Safety&utm_term=ZT1405617X&utm_medium=pla_css_2&targetid=pla-953236283968&loc_physical_ms=1006747&dev=c&gad_source=1&gclid=EAIaIQobChMIjJ3GvL_viAMVQJdQBh2TQhwWEAQYASABEgIZdvD_BwE

Thanks, Yes that is spendy for particle filters, two required at a time! £40 a go for two....... gas filters are more expensive.....