So can i run any spray gun

[Kent]

Got a 50ltr 2hp compressor rated 4.8 cfm on output, fool in the suppliers sold me a spray gun rated 7-13cfm so I took it back, however it appears Sealey don't do a gun that will work on this compressor and their technical say they doubt it will run any spray gun.
Not doing cars and such just gates, priming RSJs etc. and such anyone know if I can effectively run a spray gun using this compressor and were I might obtain one that will work?

 

[richie00boy]

It should manage for rough work if you get one of the Fast Mover LVLP guns (FMT3006). Probably best with a 1.4mm tip for your coatings.

 

[Daz1968]

My devilbiss sri pro is only about 3cfm, so maybe any mini gun would be ideal for what you are doing.

 

[711jrp]

You could pick up a old none hvlp gun a Devilbliss jga would be ideal.

 

[GrumpyOne]

Machine Mart recon this is for a small compressor.

https://www.machinemart.co.uk/shop/product/details/psc-spray-gun

 

[mike os]

some of the Clarke sprayguns should run off that

 

[mike os]

just don't try HVLP

 

[cianh91]

just don't try HVLP

im using a draper hvlp and find it doesn't affect it using small compressors atal surprisingly

 

[Turbo]

I have one of those gravity feed HVLP guns that are in Lidl now and then and I find it easy on air and very easy on paint - it uses approx 1/3 of the paint compared to my old kestrel gun.

 

[Kent]

Machine Mart recon this is for a small compressor.

https://www.machinemart.co.uk/shop/product/details/psc-spray-gun

That will do, thanks! just ordered one on-line.

 

[Wallace]

The little 0.8mm nozzle Bergen touch up guns are quite miserly on air if you are not doing large areas, I think they can be bought with a 1mm nozzle too.