Synergic programs sheet needed

[maeso34]

Good morning. I happen to have bought a second hand mig machine which doesn't come with the synergic programs number codes sheet with it. It's a Cebora Mig 5040td pulse art.289 with a wf4p wire feeder. If anyone owns it and don't mind to share a copy of the sheet, it would be much appreciated. The manuals and service manual are on the internet and I have them in case anyone needs them, but I can´t find the important programs sheet that usually comes stuck behind the the feeder door in any cebora synergic machine. Thanks in advance.

 

[a111r]

Welcome.
Have you asked the manufacture for this information?
E-mail: cebora@cebora.it

 

[maeso34]

Welcome.
Have you asked the manufacture for this information?
E-mail: cebora@cebora.it

Thanks. Yes, I finally contacted them. I also realized that, in reality, as you choose wire, gas, and material on the panel, there is no need to know the programs numbers I was used to in all of my other cebora mig welders. No that I have digged in the submenus for a while, I have found that some of the settings explained in the manual are missed. Cebora implemented a RS232 port in this machine so you can update firmware. They also sent me the firmware update but they don't tell what cable to use ( I guess that a regular usb/serie adapter) but most importantly, they don't provide the software to update it. I've failed to find it on the internet and the only solution they finally gave me was to send the machine (it weights more than a 100 kg) to the service in Spain, which would be avoid if I just could get the software and update with the firmware file the did send me.