What Is The Correct Name For This Air Fitting?

[Pollys13]

I've tried Googling various names and Google images for terms like like nozzle head assembly but can't locate.
What is the correct name for this, can anyone give me an Ebay number for these, various sizes?
Peter.

 

[rtbcomp]

If that's off your Ebay grit blaster it will be a special part - it doesn't even have a BSP thread.

 

[ford34/2]

similar::
Roman Seliger/Smooth Tail Couplings - Smooth Tail Couplings

stan

http://www.desihose.com/viewproduct.aspx?pid=1072#

 

[Pollys13]

Yes is off my Ebay blaster, the ball valves are redundant I've salvaged them to be be used elsewhere in the air supply, I've been putting together. ( see attached photos) As I say the pots ball valves are redundant there function being replaced by the foot control pedal. The ball valve on the bottom of the pot is a pig to get off, loctight must be. Another valve I took up the road to the friendly garage they got that one undone for me. Couldn't really cart the pot up the road and ask him to have a go at undoing it. I bought 4 propane gas cans, aerosol size and a torch to have a go at getting the base valve undone. So can connect up the air pinch valve for the foot pedal. The fittment I mentioned in my other post must fit onto a hose barb in the air line.

 

[Pollys13]

similar::
Roman Seliger/Smooth Tail Couplings - Smooth Tail Couplings

stan

http://www.desihose.com/viewproduct.aspx?pid=1072#

Yes the brass bit does but no male thread, but need that aluminium collar to close on the hose.

 

[DanielW]

I've tried Googling various names and Google images for terms like like nozzle head assembly but can't locate.
What is the correct name for this, can anyone give me an Ebay number for these, various sizes?
Peter.

I'm sure one of the lads on here would turn you a couple of them out for a small fee in brass hexagon provide you have the thread size and dimensions.

 

[DanielW]

http://www.brassotech.com/brass_pipe_fittings.html

 

[Pollys13]

http://www.brassotech.com/brass_pipe_fittings.html

Cheers for that, but the one on the page displayed has a thread on the inside of the nozzle. Will email them.

 

[Pollys13]

I'm sure one of the lads on here would turn you a couple of them out for a small fee in brass hexagon provide you have the thread size and dimensions.

I know someone who has done a few things in the past for me. Member of Model Railway Group, has big lathe and mill.

 

[brokenbiker]

John @doubleboost may be able to help? And get a vid for one of the night caps

 

[rtbcomp]

I know someone who has done a few things in the past for me. Member of Model Railway Group, has big lathe and mill.

I honestly don't know why you're bothering, it's a proprietary item that you won't find in anyone's catalogue and it secures a ceramic nozzle that wears out in about 10 minutes.

 

[Pollys13]

proprietary item

I'll be using the tungsten carbide version of the tip.

 

[Pollys13]

John @doubleboost may be able to help? And get a vid for one of the night caps

OK thanks.