Wolf air compressor issue

[Jon b]

Hi All,

I've got a Wolf Sioux 50, 2.5HP, 9.5CFM, 230V, MWP: 116psi, 50 Litre Air Compressor.

It has two valves/pipes where you can plug in air accessories to the compressor (sorry if that's not the correct term).

One of the valves has just stopped working. If I plug in an spray gun for example, there's no air coming out at all.

The other one works fine.

Any ideas what this could be?

 

[rikrobson]

one is usually regulated and one unregulated. has someone turned down the regulator?

 

[slim_boy_fat]

one is usually regulated and one unregulated. has someone turned down the regulator?

I only found this out by accident [who reads manuals....? ] on my cheapy Lidl job.

 

[Jon b]

one is usually regulated and one unregulated. has someone turned down the regulator?

Thanks for the reply! No, nothing has been turned down. One minute it was working, I put down the air tool and went back to it 5 minutes later, and suddenly not working

 

[rikrobson]

so is the open one or the regulated one working?
I found that the pot metal body is a bit sh*t. I cracked mine changing the adapter. I plumbed mine into two separate trap regulators.