Tom Mooijman
New Member
- Messages
- 19
- Location
- The Netherlands - Rotterdam
I've been looking at this machine, but there seem to be different versions available. Some advertisements will say the voltage range is between 10-30 volts, while others mention 14.8-26 volt.
Voltage is not everything for a mig welder but in this case the 10-30v version would open doors for people who want to weld in spray transfer. I'm most likely not included in that group, but might be good for people to be aware of these differences.
Does anyone have an explanation for these differences? I've tried contacting the customer support but couldn't get through. I'll try again tomorrow.
Attached are the two different datasheets for the same machine.
Voltage is not everything for a mig welder but in this case the 10-30v version would open doors for people who want to weld in spray transfer. I'm most likely not included in that group, but might be good for people to be aware of these differences.
Does anyone have an explanation for these differences? I've tried contacting the customer support but couldn't get through. I'll try again tomorrow.
Attached are the two different datasheets for the same machine.