Damir Margetic
New Member
- Messages
- 4
- Location
- Croatia
Hi..
I got a Castolin Castotig 2002 and i run into "some" problems..
It stopped to work, we weld some aluminium and suddenly there is no current, HF is working but no current, and no error on it..
And there is 0 V on display and output.
I open it and all voltages on psu board are ok.
Everything else seem to be ok.. Nothing burned.
On REEL show 18 V ( should be cca 45 V ) only when i power for first time and when i change mod to TIG voltage drops to 0 V and stays there..
Anybody ?
Regards
Damir
I got a Castolin Castotig 2002 and i run into "some" problems..
It stopped to work, we weld some aluminium and suddenly there is no current, HF is working but no current, and no error on it..
And there is 0 V on display and output.
I open it and all voltages on psu board are ok.
Everything else seem to be ok.. Nothing burned.
On REEL show 18 V ( should be cca 45 V ) only when i power for first time and when i change mod to TIG voltage drops to 0 V and stays there..
Anybody ?
Regards
Damir