- Messages
- 22,235
- Location
- Birmingham
- Thread starter M4TTDUFFY
- Start date
chunkolini
celebrity artiste
- Messages
- 9,456
- Location
- Swansea
Some people just have to drag things down.
Captains Log?
Captains Log?
M4TTDUFFY
Member
- Messages
- 126
Took me a minute to get that.
M4TTDUFFY
Member
- Messages
- 126
Tight update time.
Here's a few build pics of the table. It's not quite yet finished I need to add 2 bars to secure the actuators a bit better as they move a bit at full height. I also have some rewiring to do so that the remote does all the features I want it to and to hide all the cables within the steel frame itself. But you get an idea of what it will be like when finished.
The pictures were taken with my phone so quality isn't great il take proper ones when it's finished.
Brackets and plates for castors
Some weld porn with a few nice welds I was getting
Bloody mig wire ran out half way through the weld
View attachment 41554
Base taking shape
Next post will continue as I've hit my picture limit in this post
Here's a few build pics of the table. It's not quite yet finished I need to add 2 bars to secure the actuators a bit better as they move a bit at full height. I also have some rewiring to do so that the remote does all the features I want it to and to hide all the cables within the steel frame itself. But you get an idea of what it will be like when finished.
The pictures were taken with my phone so quality isn't great il take proper ones when it's finished.
Brackets and plates for castors
Some weld porn with a few nice welds I was getting
Bloody mig wire ran out half way through the weld
View attachment 41554
Base taking shape
Next post will continue as I've hit my picture limit in this post
M4TTDUFFY
Member
- Messages
- 126
The good stuff now!
The table completely down
The table raised to perfect seated welding for me
The table at full height! It's far to tall to weld on but it's still handy.
My rough guide for how I'm gonna rewire it all
My next post will be a little video of it going up and down.
The table completely down
The table raised to perfect seated welding for me
The table at full height! It's far to tall to weld on but it's still handy.
My rough guide for how I'm gonna rewire it all
My next post will be a little video of it going up and down.
M4TTDUFFY
Member
- Messages
- 126
Here's the video of the test, it takes just about 20 seconds to raise or lower to full height but as you can see full height is very tall.
With the actuators lowered the table is 78cm tall and 120cm at full height.
The noise is my space heater. The actuators are pretty much silent
With the actuators lowered the table is 78cm tall and 120cm at full height.
The noise is my space heater. The actuators are pretty much silent
