Fusion 360

[Hood]

Here are some tutorials on lathe.
http://help.autodesk.com/view/fusion360/ENU/?guid=GUID-B00EE09F-C19E-4ACE-AF48-CDC49F9295A0

 

[ukracer]

Here are some tutorials on lathe.
http://help.autodesk.com/view/fusion360/ENU/?guid=GUID-B00EE09F-C19E-4ACE-AF48-CDC49F9295A0

I think I will have to pass on the lathe for now. I need to learn the router and I get confused easy.....lol

I have had a good look around on youtube and can't find much of getting a final prototype created on manual mill to CNC Router sadly.

 

[ukracer]

You just open the model then change to Manufacture instead of design, you then choose Setup and choose whether Mill, Lathe or Cutter. You choose stock and origin then you now have the basic setup. You can then choose operations to do, if lathe it would start with a face then next operation to choose would be roughing and basically you just step through all the options as you go until you have the toolpaths chosen and doing what you want.
.

You Make it sound so easy. Lol

 

[Hood]

That link I gave you also has mill tutorials if you look at the menu on the left.
http://help.autodesk.com/view/fusion360/ENU/?guid=GUID-FEFD4AFD-C53D-4411-85C0-62053B2FD105

 

[ukracer]

That link I gave you also has mill tutorials if you look at the menu on the left.
http://help.autodesk.com/view/fusion360/ENU/?guid=GUID-FEFD4AFD-C53D-4411-85C0-62053B2FD105

Does it have router ones? My mill is manual and I am finding curves hard. Having to turn 2 handles at the same time...

 

[Hood]

It may do, depends on the control, if it has Mach3 or Linux CNC then there are Mill posts which will probably be close, if it is some other then you will have to look and see.

https://cam.autodesk.com/hsmposts

 

[ukracer]

It may do, depends on the control, if it has Mach3 or Linux CNC then there are Mill posts which will probably be close, if it is some other then you will have to look and see.

https://cam.autodesk.com/hsmposts

It's Arduino...

 

[Hood]

Not a clue about them, maybe a google search will bring up something regarding a post processor for it.

 

[Hood]

Seems a lot of Arduino use GRBL so maybe some of these posts will work.
https://cam.autodesk.com/hsmposts

 

[Hood]

Ah that link didn't work, you will have to do a search on that page for GRBL.

 

[Hood]

I have been messing around with sketch projections, angled and offset planes and all sorts of fancy things.
Starting to get my head around them, anyone wanting to 3D print this?