Need help, Airfed mask related

[m5dkw82]

So basically the solution to this problem is

if I want to run both from same line, I need a monster compressor, 300 ltr, 3hp massive cfm fad

or 2 lines with a min of 100 ltr 3hp, but finding anything like this with more than 9 cfm fad is neigh on impossible (this so called warrior claims 14.6 cfm displacement)

 

[carbon]

As the warrior claims to be 14.6 cfm displacement it would suggest to me that's something's wrong with it. I'm assuming it's a twin cylinder pump so maybe only one cylinder is working correctly causing the low output

 

[m5dkw82]

Ah......... the penny has dropped

Warrior is 50 litres, PROV-600, Supply Pressure: 4.0 bar (60 psi) minimum to 7.0 bar (100 psi) maximum - Air Flow Rate: 128 – 160 l/min (4.5 – 5.7 SCFM)

so 4 bar / 128 l/min 64 litres per 30 seconds - 32 litres per 15 seconds


I have no way of knowing how many litres left my compressor but them figures are close to my 23 seconds then refill kickin in

 

[m5dkw82]

Warrior Displacement - 412ltr/min (14.6Cfm)

I am losing 128 litre per minute and the warrior is capable of 412 litre per minute - something not right

 

[carbon]

Even though it's output is 14.6 cfm don't expect to achieve that, the 9 cfm you quoted earlier is a more realistic figure, which still should run the mask without running continuously.