Today I acquired...........

[Hood]

is it ketamine that also gives you short term amnesia?

Ex gf was a medic and they used one that did that so people wouldn’t get mental health issues from trauma. I suppose flashbacks of your arm in a baler isn’t nice! Whatever it was is also used by ne’er do wells as a date rape drug. Apparently.

Don't think so, or not for me anyway, it made me very aware of what was going on, well both of us as I was hovering above the bed saying some weird things and then the me that was lying on the bed was apologising to the nurses for what the flying me was saying. Nurses were in stitches.

 

[25.4_mechanic]

To get back to my upcoming task of having to make a 272mm long gib-strip for the long ML7 cross-slide
- and also to stop myself from getting into the pharma conversation -

my question:

Would you make this out of cast iron or gunmetal, maybe brass?

And how - if there is a thread on this here, I haven't found it?

Thanks for any suggestions!

Have a good evening

Carsten

--

 

[Bki26]

To get back to my upcoming task of having to make a 272mm long gib-strip for the long ML7 cross-slide
- and also to stop myself from getting into the pharma conversation -

my question:

Would you make this out of cast iron or gunmetal, maybe brass?

And how - if there is a thread on this here, I haven't found it?

Thanks for any suggestions!

Have a good evening

Carsten

--

Brass and with a dovetail cutter if it's a standard rhombus, or just buy it as seen 232mm ones on ebay

 

[25.4_mechanic]

Brass and with a dovetail cutter if it's a standard rhombus

Thanks!

just buy it as seen 232mm ones on ebay

Saw that - seems a bit short for 272mm to me though (apart from getting the gib-strip alone here in one piece ...). Is it not?



Thanks,

Carsten

--

 

[Bki26]

Thanks!




Saw that - seems a bit short for 272mm to me though (apart from getting the gib-strip alone here in one piece ...). Is it not?



Thanks,

Carsten

--

I wouldn't know what the correct size is, there's part numbers in some of the eBay listings so that should help you but if you have a mill and the time you can just make your own.

 

[EddyP]

on the topic of hay fever - has anyone had an Kenalog Injection ?

I've tried pretty much every tablet there is trying to find a decent one.... only one that doesn't knock me out if loratadine - but I'm taking six a day instead of one a day


I'm ok if I take them, hardly ever sneeze, can breath ok most of the time.... but as soon as I lay down to sleep my nose blocks and I'm breathing through my mouth all night (snoring keeping the gf awake too)

trying to look for something a bit better, and I'm guessing 6 a day of the one a day tablets isn't good for me long term

I hated nasal sprays too then I found avamys, two sniffs of that first thing in the morning when I know the pollen is bad and a single loratadine taken every day from march till October and I'm ok.
But if you wait until symptoms appear to start taking the nasal spray its too late and it doesn't really recover the situation.

 

[DAPPH]

Today, I acquired a large brick in excellent packaging.

After breaking through the weapons-grade plastic, I found this box:

View attachment 351050




And in the box then ...

.... Yes, it fit in there perfectly, and at first it didn't want to come out.

View attachment 351052


A long cross slide for the ML7.

Bought via eBay.co.uk and forwarded to me by an extremely helpful fellow forum member who really spared no effort.

You know who you are, so many thanks again!


What a nice forum this!


This appropriately came from another source:

View attachment 351053



Now I just have to learn how to make a sufficiently accurate long gib-strip.


Carsten

--

Make two or three gib strips out of precision brass strip , drill light locating indents in the strip to correspond with the block .. that's what's on my lathe .

The locating screws have a reduced rounded point for this locating in the gibs .
It takes two or three attempts till you get the feel of resistance right . I started at one end got it right then moved to the center pair , then the final pair , backed each screw off 1/12 of a turn till things started to move , progressed to the last pair doing the same then carefully locked each up its half nut .
Found at first I'd also moved the adjusting screw a smidgeon as well , that's why it took several attempts .
In the 8 or more years I've had the lathe that's been the only time I've done the cross slide gibs . .

 

[DAPPH]

They've also given me some Morphine but I'm saving that for recreational purposes

The first 96 hrs are the worse , after that its just a bit off pain .., I offer that you leave the morphine alone , for a lot of folk it makes them very very anally retentive , overcoming that makes you strain & that does hurt your knee

 

[DAPPH]

I got as much morphine as they could give me and it didn't help so they had to call the surgeon who administered some ketamine, pain soon went and I was talking gibberish but fully aware of it

That's just the Scottish accent ?
I was put on ketomine pain clinic trials back in1995 for my spinal injury , it did not work on iota , but ihid twype hy worms inn hay a mucking fuddle fore skeferall wheats .

 

[25.4_mechanic]

anally retentive

I had to look that up - and along with the explanation came some cartoons.

I found this one apt and nice:

Have a nice day all

Carsten

--

 

[RichardM]

Self explanatory really.
Was well wrapped, clips on the top, sealed plastic bag, bubble wrap, paper wrapping and then a nice strong cardboard box.

 

[dobbslc]

The first 96 hrs are the worse , after that its just a bit off pain .., I offer that you leave the morphine alone , for a lot of folk it makes them very very anally retentive , overcoming that makes you strain & that does hurt your knee

In huge pain all last night.screaming at times. I had 2 lots of morphine and would take more if I could get to it. Wifes hid it.
Going back to see Doc in an hour.
Morphine ibuprofen paracetamol codeine still no good.

 

[Fred Trevvett]

A doctor told me there are three families of painkiller and they all work differently. Paracetamol is in one family, ibuprofen is in another, and codeine and morphine are both in the third. Because they work differently, you can take the maximum dose of pills from separate families, e.g. paracetamol and ibuprofen, but not from the same family, e.g. codeine and morphine.

They put me on the max dose of paracetamol, ibuprofen and codeine after my op (pain wasn't enough to justify morphine)

Probably doesn't help but just thought I'd put it out there

 

[25.4_mechanic]

Going back to see Doc in an hour.

The right decision!

Knee must not hurt so much after this time - shoulder would be something else, but have it looked into urgently!

Have much luck


Carsten

--

 

[25.4_mechanic]

Something for turning

Look neat - above low eBay-level, weren't expensive, arrived very quickly, packaged perfectly and as a bonus a pair of work gloves as cushioning material.
What's not to like?


I got some tips on knurling here and @Lewis_RX8's DIY report also inspired me to try my hand at it, but now I needed a quick solution.

Smaller opening than I would have liked, but I needed something now and still have to practise.

The brown colour is preservative grease, not rust.

Carsten

--

 

[MattF]

Those PPK holders are actually quite decent. I've been using those for a couple of year now, & I've had no problems whatsoever with them.

 

[Slowcoach]

That's nice how much did it set you back?

Not too much, thought it worth a gamble
Someone‘s had a bite from the table but what can you do.
Theres no switch and a couple of nuts and bolts missing and need to check the motor which is massive.

 

[slim_boy_fat]

Something for turning

Got a link, please Carsten?

 

[slim_boy_fat]

Not too much, thought it worth a gamble
Someone‘s had a bite from the table but what can you do.
Theres no switch and a couple of nuts and bolts missing and need to check the motor which is massive.

Do you wear a mark and a stripey jumper?

 

[Slowcoach]

Do you wear a mark and a stripey jumper?

Who’s Mark?
N. O.
j u s t
s l o w.
don’t forget I had to hire a van and put fuel in too.
would have been cheaper on a pallet but that wasn’t happening.