- Thread starter monkeymark
- Start date
Maker
Most folk just call me; Orange Joe
- Messages
- 10,511
- Location
- Don't ask questions
3 Bowens studio flashes! 
I had a cunning plan to use one as a backlight for scanning film. I made an insulting offer on the middle one, I thought there's no way it'll be accepted so I bid on and won the one on the right, then the first guy accepted my offer. Great, I don't need 2 but whatever they were cheap. Then the seller of the middle one messaged me "I'm moving house and need this gone so I've included some more Bowens kit for free". I figured it would be a softbox or an umbrella, not the whole extra flash on the left!
I had a cunning plan to use one as a backlight for scanning film. I made an insulting offer on the middle one, I thought there's no way it'll be accepted so I bid on and won the one on the right, then the first guy accepted my offer. Great, I don't need 2 but whatever they were cheap. Then the seller of the middle one messaged me "I'm moving house and need this gone so I've included some more Bowens kit for free". I figured it would be a softbox or an umbrella, not the whole extra flash on the left!
Memmeddu
Member
- Messages
- 4,891
- Location
- Italia Sardegna
Today I've got a fresh haircut and later I went to collect from an eBay seller nearby home
A cosmos American style steel #4 tap wrench.
A cosmos American style steel #3 tap wrench
A cosmos 50mm steel die holder
An unknown 25mm brass body die holder
Brand new old stock, they need a little bit of care but at least heavy duty.
60 Euros in total .
I now need a #0,#1,#2 tap wrenches.
A cosmos American style steel #4 tap wrench.
A cosmos American style steel #3 tap wrench
A cosmos 50mm steel die holder
An unknown 25mm brass body die holder
Brand new old stock, they need a little bit of care but at least heavy duty.
60 Euros in total .
I now need a #0,#1,#2 tap wrenches.
It is caustic, are you using it on aluminium?
JOEPRO
Member
- Messages
- 3,474
- Location
- UK
Intending to use it on painted parts and plastics initially - do you mean that it would potentially mark aluminium surfaces such as engine casings?
I don't know, I have never tried cleaning aluminium with caustic as I know it reacts, not sure what damage it will do or how long it will take at those concentrations.
JOEPRO
Member
- Messages
- 3,474
- Location
- UK
My initial impressions this evening using it neat from a spray bottle to clean con saw casings was positive. Light foaming action, not much of a smell from it and seemed strong enough at cutting through old grease with a brush working it in.
Impressed. 5L at £12 is a great deal.
Impressed. 5L at £12 is a great deal.
- Messages
- 22,428
- Location
- Birmingham
Pete.
Member
- Messages
- 14,472
- Location
- Kent, UK
That would be much more efficient on the roof. Just sayin'....
Memmeddu
Member
- Messages
- 4,891
- Location
- Italia Sardegna
I've bought this battery charger off eBay, it has starter capabilities up to 150A (given output current).
I'm in it's need right now to charge my Punto battery so I can check if everything's right with the wirings.
I've opted for this one because I've got it for such of good price.
Only 80 euros while a manual transformer based charger capable of just charging with a 20A maximum output and brand name it's around 200 euros .
65 euro for a cheap no brand one 6A output .
Downside I have to wait and ask someone to charge my battery and it would be the last time.
Ps tap wrenches pictures shortly later
OJCar
Member
- Messages
- 1,858
- Location
- Lothian & Westmorland
And now a thread about getting a solar panel out of a van ...
Step one move the big iron table out of the van...
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,743
- Location
- Going Away.
As a thank you for my time yesterday I was given this?
Sergei Slovenija
Member
- Messages
- 1,267
- Location
- Slovenija Ljubljana
A complete set of extensions for taps. Fits DIN standard square dimensions.
This week I bought two Vertex dividing heads covered in surface rust (which cleaned off easily). Originally I wanted only one, but the price was very reasonable. My plan is to sell the larger green dividing head as I find it too heavy for me to lug around (about 35 kg).
I had to strip both heads down fully to fix a number of small issues which have now been resolved. The chucks are presumably factory-fitted on a screw thread which was "interesting" to remove. One head is missing the handle / sector arms / plates but I have ordered some spares. They probably aren't as good as the larger dividing head, but will be much easier for me to set up on the milling machine.
I had to strip both heads down fully to fix a number of small issues which have now been resolved. The chucks are presumably factory-fitted on a screw thread which was "interesting" to remove. One head is missing the handle / sector arms / plates but I have ordered some spares. They probably aren't as good as the larger dividing head, but will be much easier for me to set up on the milling machine.
JMS1972
Member
- Messages
- 1,208
- Location
- NW Leicestershire, UK
SM32 (sixteen millimetre to the foot scale) locos my nephew wanted a Garden railway but he's lost interest now he has a car....
My loco at another track.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,743
- Location
- Going Away.
We ,like a lot.
