Today I acquired...........

[The_Yellow_Ardvark]

Mine was dented by the reversing lorry in Portsmouth , the pic was taken at RAF Brize Norton ..1982/3

I had a stripe along side and mini stripes all along bonnet , wolf race wheels and twin Weber carb. Pride and joy back then : )

Mine wasn't dented by me, but it was welded by me many times.

The Weber twin made a big difference, but fuel was cheep then.
It was a great weekend wagon

 

[Cobbler]

Good old Watneys - a Watneys lorry reversed into my beloved Opel Manta back in the early 80's. I got three quotes and took it to my brother's body shop ; ended up quids in...

One thing, the driver would have been sober even if he’d been drinking Watneys Red Barrel, it was so weak it was almost impossible to get drunk on it.

 

[MikeBB1970]

It was Brickwoods beer for me Cobbler , when I managed to get in for a beer ; but then - they sold a cig and match to school kids on the way to school : )

 

[highseas]

This bonny lot
From a skip!! 300 black safty screws, 2 new boxes of hilti thread bar stuff
200 m13 x30 with nuts and washers
100 m10x30
40mm sqare washers
A big bo of about 30 ss studs with 2 nuts and washers on eah about m24
Gloves
3 bags of cable ties
Some ss weld on pipe fittings
What seems to be a steam valve thin?
Some wall Anchor sleves to gonon m10 thread....
Onn and 20 metal rollers about 300mm long that will soon be a feeder table for the band saw!

 

[The_Yellow_Ardvark]

Watneys Red Barrel, it was so weak it was almost impossible to get drunk on it.

Like having intercourse by the Kennet and Avon.

 

[Hood]

Today I acquired an AC to DC PWM controller.

It cost about £5 delivered from China. I hooked it up to a motor that was originally a spindle motor on a small CNC lathe.

It seems to work as advertised although I have not tested the RPM yet to see if it is getting to full speed but I tried stopping the motor by grabbing the shaft at 12v and it was impossible to do.

Not sure what I will use the motor for if indeed anything but at least now I can easily power it and vary the speed so maybe one day I will find a use

 

[4String.]

A new triathlon style wetsuit, bought as a “If today’s Colonoscopy goes well” present to myself. And it did .

Seriously sexy thin neoprene, tight enough to leave little to the imagination, and a pervert’s delight to wear , am looking forward to contorting myself into it and getting into some open water swimming. Off work for the next couple of weeks on Doctor’s orders, (haven’t slept well for a long time what with one thing and another, and when I told the Doc that I drive an artic for a living, she prescribed a course of sleeping tablets and signed me off straight away...), so hoping to get in the water asap.

Definitely NOT looking forward to putting it on though. Even after losing half a stone in weight with worry in the last 2 weeks, it has to be literally peeled on using copious amounts of either talcum powder or baby oil , and needs a very steady hand and very short finger nails to avoid damaging the thin neoprene. Mind you, it feels quite nice once it’s on

 

[highseas]

Pictures of said ss studs and safty screws

 

[Hood]

Also just acquired some door closers that I hope will do for the gates (if I ever get them blasted and fitted )

 

[The_Yellow_Ardvark]

Also just acquired some door closers that I hope will do for the gates (if I ever get them blasted and fitted )

View attachment 189903

Nab Dan it.
If you wanted Gibraltar door closer I junked 12 two weeks ago

 

[Hood]

Nab Dan it.
If you wanted Gibraltar door closer I junked 12 two weeks ago

No use telling me now

 

[The_Yellow_Ardvark]

No use telling me now

Yes there is.

 

[God mode restorations]

I have a couple of big presses in the yard for the truck/plant gear, an old pre war clunker thats 65+ton and really nicely made,another which is a churchill 15ton floor standing which I move around with the forklift to wherever I need it. That little red one is surprisingly well made and just for working on the toys so I dont have to go out in the rain

Bob

View attachment 189815 View attachment 189816 View attachment 189817

I do like that big press

 

[dobbslc]

Any wise man would of done a bit of checking, before assuming a Henry can do wet and dry.

My skip one, does not like water.
It tells me on it.

I'm hoping you realize it wasn't me that made Henry snort water!!!

Maybe waterproof seals/bearings between the motor and suction fan?

What is that fitting for, emptying the water out?

That's a Charles wet and dry and I think the fitting is for carpet cleaning as it had a diaphragm pump attached to it.

My brother tried it once, only once too! He hoovered water straight out the toilet and broke it!!!

PMSL!

I have a Henry, hetty and a James,
All 3 found/gifted for free.

Only thing I found he doesn't like is absorbent granules.
Or the fact they had absorbed petrol and when hovered up the fumes ignited from the motor sparks and sounded like a jet turbine spooling up.

Was great but slightly scary.

PMSL again!

 

[dobbslc]

Alas Henry is not well
Looks like the knuckle draggers on site have used him without a bag and abused him badly, the switch was knackered so I think Cro Magnon man launched him across site in frustration and bent the motor shaft and / or fan blades.
He runs but sounds like a 60 a day smoker on crack!
I'll use the good bits to repair my first ever skip dive Henry that needs a few parts so he didn't die in vain!

 

[Moose McAlpine]

I'm hoping you realize it wasn't me that made Henry snort water!!!

He's done worse. Henry's had his highs and lows. Let's hope he's clean now.

That's a Charles wet and dry and I think the fitting is for carpet cleaning as it had a diaphragm pump attached to it.

Oh, that makes sense. I wondered if it was some strange fitting for siphoning off the bulk of the water or something.

 

[jerrytug]

Locally for a couple of quid, an old army draughtsman's set, the instruments are mixed but some are quite old, with the WD double arrow. I wonder where it's been?

 

[Seadog]

Today I acquired this for £50

I'm a very happy bunny

 

[Moose McAlpine]

Wossat?

 

[Seadog]

It's a Boxford Little Giant Toolpost Grinder. Easily £250 or more.

Shpock is well worth monitoring.