Aldi mitre saw stand for £39.99 delivered

[postie jon]

just got mine delivered this afternoon, seems substantial enough, was wanting a second set of clamps as i have a mitre saw & a rage 2 chop saw , the cheapest i can find is £35 + p+p. ,strange as the complete bench including delivery was only £39.99, something doesnt add upp.

 

[brightspark]

is there much difference in the titan ones in screwfix ?? there a tenner dearer

 

[zx9]

is there much difference in the titan ones in screwfix ?? there a tenner dearer

Looks exactly the same as the titan one @ScottL reviewed except different paint / powder coat and locking screw (s) colour.
http://www.mig-welding.co.uk/forum/threads/review-of-titan-evolution-generic-mitre-saw-stand.79009/

It is even made by / for Scheppach who are a Screwfix supplier and probably do many more home brands.

 

[brightspark]

are they still available in stores

 

[-Matt-]

I picked one up today, so I'd say yes!

 

[brightspark]

might go see about getting one tomorrow aftie after going to ruffoth autojumble

 

[Richiew]

There were two left in the Norton (Bluehall) store this evening.

 

[brightspark]

There were two left in the Norton (Bluehall) store this evening.

will call tomorrow dinnertime hope they haven't sold out

 

[rikrobson]

Ordered nine last week and it got delivered on Wednesday. But Mrs was out so it got left at the sire reception and then she picked it up. And is now in the boot of the car. Methinks I'll have a play tomorrow

 

[-Matt-]

might go see about getting one tomorrow aftie after going to ruffoth autojumble

If you're over this way you could pop into the Aldi at Monks Cross, there's one left! Rufforth should be good tomorrow, good weather should get loads of people out.

 

[brightspark]

If you're over this way you could pop into the Aldi at Monks Cross, there's one left! Rufforth should be good tomorrow, good weather should get loads of people out.

cheers for reply . I went to ruffoth it was busy and a lot there . didn't buy much a shovel handle and a couple of planer blades and a gallon of duck oil . got a c 02 bottle exchanged for a mate 18 quid and that was it . picked up a saw stand and assembled it . it seems decent enough for the use it will get .if I was using every day would have spent a lot more. handy not having to use the saw on the floor

 

[slim_boy_fat]

Methinks I'll have a play tomorrow

Today was tomorrow yesterday. Been playing?

 

[-Matt-]

cheers for reply . I went to ruffoth it was busy and a lot there . didn't buy much a shovel handle and a couple of planer blades and a gallon of duck oil . got a c 02 bottle exchanged for a mate 18 quid and that was it . picked up a saw stand and assembled it . it seems decent enough for the use it will get .if I was using every day would have spent a lot more. handy not having to use the saw on the floor

It was busy, I was right in the overflow in the far end! Not so many inside though. Got some little V blocks.
Got my saw stand together too, found the provided M6 coach bolts too long and fouled on the mitre handle. Can't go to 45degrees until I cut or replace the front ones.

 

[skotl]

cheers for reply . I went to ruffoth it was busy and a lot there . didn't buy much a shovel handle and a couple of planer blades and a gallon of duck oil . got a c 02 bottle exchanged for a mate 18 quid and that was it . picked up a saw stand and assembled it . it seems decent enough for the use it will get .if I was using every day would have spent a lot more. handy not having to use the saw on the floor

So we've all got one, apart from @cumbriasteve

 

[Turbo]

I've just realised that the saw is 60 euro in ROI which is £53, so the titan one in screwfix works out cheaper at £50!

 

[cumbriasteve]

So we've all got one, apart from @cumbriasteve

Where is that reverse Winston Churchill smiley when you need it

anyways...I may have bought one and kept it quiet ...maybe a super deluxe one with speakers and maybe led lights that flash to the sound of the saw blade...

 

[zx9]

Got my saw stand together too, found the provided M6 coach bolts too long and fouled on the mitre handle. Can't go to 45degrees until I cut or replace the front ones.

They are very long, I shortened all four and have fitted dome headed nuts to act as lock nuts and neaten it up a bit.
How sad is that? Customising a forty quid saw stand, but no Quadrphenia style mirrors or Kit like light show here!

 

[slim_boy_fat]

So we've all got one, apart from @cumbriasteve

Errrr,, *cough*, *cough*..... [situation may be rectified coming week.....]

 

[cumbriasteve]

Errrr,, *cough*, *cough*..... [situation may be rectified coming week.....]

Don't do it!

We were all happy without them until @skotl put temptation in the way, just so he can justify to SWMBO that all members have them and ownership of one is a rule of the forum.

 

[brightspark]

was going to fit my saw on new stand today . went in garage and the resident robin flew out from its nest on shelf near saw so that's put that off for a few weeks till they have hatched and left

Don't do it!

We were all happy without them until @skotl put temptation in the way, just so he can justify to SWMBO that all members have them and ownership of one is a rule of the forum.

after doing a full house using chopsaw on the floor and seeing post on here I decided its time to have one. it will get used for 3 days in a school in hols fitting a computer room out with 40 data points and 36 double sockets fitted in to dado trunking so plenty of covers to cut and it will make it easier work and faster more money as its a price job