Stuff you have made today

[magnet]

Made this little viking inspired barb lock to secure my tools at work while im on a weeks holiday. I got back from my last break to find my gear strewn to the four winds. So half an hours work and i knocked this up. Thats enough to keep the I tealeaves oot!

 

[Kram]

Been sorting out my climbing stuff and adressing little niggles, like the adjustment straps on my harness flapping loose, as they wont reach the original retainer for fat people!

Then, having spliced some prusik cord eyes a while back I thought I should do the lock stiches, so I can use them. Followed the Samson guide for that as it seems the most sensible way to do it.

 

[Erie Fred]

Banged this out after I thought of it on the drive out to the shop, raided my scrap bin:

 

[Erie Fred]

My friend on the roof of my building, touching up a rust spot with cold galvanizing spray, just too high to reach, and we didn't want to haul a ladder up there, and risk it sliding. Rope attached to the hinge, spray can hose clamped into the angle piece, pull rope to depress spray can button.
Easy Peasy.

 

[Erie Fred]

I realized I had not posted pix of the head assembly with a can in place.
went back today and snapped some pix to clarify a bit.
I'm keeping this around, i think it will come in handy for other uses like hornet nest spray etc.

 

[Onoff]

Competition time I reckon for the best remote aerosol, can holder sprayer thingy!

 

[Dcal]

Today I made a tool for removing the sump plugs from Fiat and Alfa diesel engines.

There is restricted access because of the subframe and the few I work on are often butchered by the time I see them.

I couldn't crack it with my longest 13mm spanner.

And I couldn't get a breaker bar to fit.

So I welded a socket to a broken breaker bar.

And that did the trick

I was going to weld the end of an extension bar to the breaker, so I could use different sockets, but I reckoned the retaining ball would be toast and I haven't needed anything in another size before so kept it simple.

 

[Maker]

There's a snake in my boot!


Made by my mum not me, but too cool not to show off. A couple of crocheted snakes, filled with activated carbon, zeolite and essential oils, to take the stank out of my climbing shoes.



DIY rip off of Boot Bananas, snakes are obviously much better than bananas.

 

[Hood]

Didn't have any work lined up today and was half thinking about not going in but decided I better.
Then a guy came in and wanted a bracket made for a satellite dish.

Then a fisherman wanted a set of plates skimmed.

And then another fisherman wanted me to do a conversion to his roller system, most of the stuff won't be here until Thursday but I did have enough 10mm Alu and some 100mm dia nylon so I could make the guide roller up in preparation for the rest of the stuff arriving.

 

[Seadog]

You're ahead of the game then.

 

[Onoff]

2L of blackberry vodka.

 

[doubleboost]

The Wife made this

 

[DAPPH]

The roll is the wrong way round , put is so the free paper comes off the side farthest away from the wall .. It prevent brown stains on the wall

 

[JOEPRO]

The roll is the wrong way round , put is so the free paper comes off the side farthest away from the wall .. It prevent brown stains on the wall

+1

If I see this I have to rotate the roll immediately.

No sh+t

 

[doubleboost]

+1

If I see this I have to rotate the roll immediately.

No sh+t

Just been upstairs and sorted it .

 

[arther dailey]

The Wife made this
View attachment 463610View attachment 463612

View attachment 463611

excellent

 

[Onoff]

The Wife made this
View attachment 463610View attachment 463612

View attachment 463611

Ideal for resting your nuts on.

 

[doubleboost]

Ideal for resting your nuts on.

Better than the scrap man getting them (spanners not nuts)

 

[Munkul]

In progress.

 

[Erie Fred]

I recycled a skid steer QA plate.