Stuff you have made today

[Hood]

Today I cut some bits out of 8mm steel for a guy that goes by the name of Snack Beard the Yoon or something like that

I cut the holes undersize and will mill out to final size on the Chiron.

 

[Shox Dr]

Today I cut some bits out of 8mm steel for a guy that goes by the name of Snack Beard the Yoon or something like that

I cut the holes undersize and will mill out to final size on the Chiron.

View attachment 176141 View attachment 176142

We’ve a 2x3m waterjet coming in a few weeks

 

[Hood]

We’ve a 2x3m waterjet coming in a few weeks

My friend has one at his work, used mainly for cutting glass but he got some 60mm thick steel cut for me when I was making the first turret on my lathe, amazing machines by all accounts.

 

[Shox Dr]

My friend has one at his work, used mainly for cutting glass but he got some 60mm thick steel cut for me when I was making the first turret on my lathe, amazing machines by all accounts.

Yes, this will slice through 180mm steel. Its part of an engineering firm we’ve bought.

 

[Ruffian]

Busy one building the starter of a dining room booth.

"Happy wife, happy life" And all that.
But now 4 pints of cider (in pitchers so dont have to refill as often) and feet up in front of the BBq I'm not complaining now.

 

[Hood]

Yes, this will slice through 180mm steel. Its part of an engineering firm we’ve bought.

I think he said there one does about that as well.

 

[selectedgrub]

What's the intended use? Desk ornament? Parerweight? To be sold?

Yes it's sold, just some wall art.

 

[Hood]

Just been sent a vid of the latest Cat I fitted out. Loaded with 3 fleets of gear and still flying.

 

[The_Yellow_Ardvark]

It survived the caustic and Citric acid.



The metal moth has attacked it, but a bit of metal filler sealed and sorted most of them.



It will take it's place in garden. I have filled it with "Insect Repellent Oil" and it is in use as I type.

 

[eSCHEn]

Today I cut some bits out of 8mm steel for a guy that goes by the name of Snack Beard the Yoon or something like that

I cut the holes undersize and will mill out to final size on the Chiron.

View attachment 176141 View attachment 176142

I just had to show the wife that horrid video again as she didn't know SB either. You're a rotter!

Hood that is just so amazingly fantastic I can't express how awesome it is! I am slightly moist with excitement I'm so happy I will let the other comment slide you handsome little imp you XXX

Just been sent a vid of the latest Cat I fitted out. Loaded with 3 fleets of gear and still flying.

Never fails to make me smile how steady they run. Lovely boat

 

[slim_boy_fat]

Today, among other things done, I made a hole......50mm through 10mm plate using the largest of my Banggood hole-cutter set. It was hard going and took ages, [I have no idea of what grade the steel is, it's 'skip booty' ] with the drill jamming frequently despite light pressure and copious applications of oil. In the end I had to drill through from the other side to complete the cut. Maybe I'm expecting a lot from the poor thing , but the biggest drill have I could use on the lathe is 16mm blacksmith's shank.



Another one to do yet, then I can proceed with Plan A for the hydraulic bench press.

 

[Farside]

but the biggest drill have I could use on the lathe is 16mm

Couldn't you mount a plate on the chuck face plate and score a hole onto it?

 

[Hood]

Yes, this will slice through 180mm steel. Its part of an engineering firm we’ve bought.

This is the one I was talking about, says up to 200mm.

http://www.hurrybros.co.uk/water-jet-cutting/

 

[Shox Dr]

This is the one I was talking about, says up to 200mm.

http://www.hurrybros.co.uk/water-jet-cutting/

Don't know the make or if it has a 3d head. They are just one with putting the slab in at the moment. There’s more room need for all the water treatment etc, It has a 30ph motor for the compressor

 

[slim_boy_fat]

Couldn't you mount a plate on the chuck face plate and score a hole onto it?

Yes, I have done that. Drilled it out to 16mm and was going to enlarge it - it's still in the chuck but I think it'll be quicker to use the hole-cutter.

 

[Hood]

Yes, I have done that. Drilled it out to 16mm and was going to enlarge it - it's still in the chuck but I think it'll be quicker to use the hole-cutter.

Not got boring bars?

 

[nickk]

My partner rescued this kids tricycle tandem last week ,from the skip at the nursery our twins attend,as well as a giant articulated car transporter( it pees me off the stuff they throw out,whilst at the same time have regular fund raising/ scrounging pleas),so it needed a new wheel as it’s got 2 flats,how the hell! A wheel was found off an old portapak trolley,so an axle was made ,drive spigot & cranks welded in then reassembled.oh & a grease groove in the axle.

 

[nickk]

2 happy cyclists later.

 

[eLuSiVeMiTe]

View attachment 176235 View attachment 176236 2 happy cyclists later.

Have a three wheeled scooter of the same design/make.
Little bit of talc on the rear (supposed) wheel bearings and back into service.

 

[nickk]

Have a three wheeled scooter of the same design/make.
Little bit of talc on the rear (supposed) wheel bearings and back into service.

What’s wrong with a light grease ?