Stuff you have made today

[Maker]

Don't buy HTC as there customer service is literally none exsistant. Spent £370 on a phone and the back fell off and the didn't want to know!
Samsung seem good though.

You could have got a Galaxy S8 for that price, that's what I'd go for.

 

[dobbslc]

Next time it probably will be a samsung. My tablet seems good!

 

[eLuSiVeMiTe]

Have you got it delivered yet ? I have bought one too, but it will be a while before i get it. The way i look at it is, if you get three or four years out of it and it pops, its no big deal, chuck it in the bin and get another one.

Mine arrived yesterday.
Buttons are very clunky but easy to program. Wasnt keen on the connectors and only had one earth so both cables had to go into one connector. No anti tug either but will sort when mounted.
Plus side. The motors Definetly good.
Really clean inside too..

 

[ronan]

Mine arrived yesterday.
Buttons are very clunky but easy to program. Wasnt keen on the connectors and only had one earth so both cables had to go into one connector. No anti tug either but will sort when mounted.
Plus side. The motors Definetly good.
Really clean inside too..
View attachment 178047 View attachment 178048

I happened to be looking at a review on youtube of a chinese vfd earlier, there was no earth clamp/screw. The lad had to drill the heat sink at the back for an earth. They chinese do odd things at times.

 

[eLuSiVeMiTe]

I happened to be looking at a review on youtube of a chinese vfd earlier, there was no earth clamp/screw. The lad had to drill the heat sink at the back for an earth. They chinese do odd things at times.

I shall count myself lucky. Was only a mild annoyance as had to trim the sleeve to get enough length to get to the earth.
Wouldn't have been an issue if they had stuck it in the middle.

 

[Pete.]

Don't buy HTC as there customer service is literally none exsistant. Spent £370 on a phone and the back fell off and the didn't want to know!
Samsung seem good though.

Don't count your chickens yet. If you get even the tiniest bit of damage on the case, forget Samsung factory warranty. My daughter had a tiny chip on the back and they refused to repair the faulty motherboard. The phone was in such good condition I got £170 for all the bits with the motherboard removed but they put it down to 'serious physical internal damage'. It had refused to start back up after a software update, is all.

 

[The_Yellow_Ardvark]

Thanks to a dumb customer I have been awake since 3am.
But that's the joy of "Being on Call"

Got home, it was plane that sleep was not a choice, so into Workshop.

Job one. The White Railway Lantern



Complete, but very rusty on the inside. Painted with emulsion paint.

See above for the fuel tank.

The main body was made from steel plate, lead solder together. Strong when fitted with the tank and door shut. But did flex when they were not fitted or open.
More of that later.



De-rusted and paint striped.

De-rusting was done with hot citric acid. You can see the results, over night the rust had gone.
Paint stripping was with hot caustic soda, took 3 hours.
Both tanks were a home made experiment. I will stress it was safe, just looked a "Bit Iffy" to quote my friend.
So for that reason I will not post images.
But the mix for the caustic soda was one heaped table spoon be litter of water.



The main reason for the body flex was the solder joints had cracked. Some this was due to age. But some was due to the force exerted on trying to remove the rest welded tank.
But , as in the tank, the gear was out to repair I carried out the brush soldering on the lap joints. Were I could open the joints up I did. Adder core flux solder and heated. Brushing the surplus along the joints.
Paint was normal primmer, under coat and Gloss white.
Were there was signs of original manufacturing or age related repairs I left them in place and blended my work in.



Fully working.
The main red lens was silicon putty into place. No other reason than the fact was I had the putty to hand.
One side lens was damaged. So I cut a new one from glass. Covered it in 6 layers of paint and distressing it between coats. Final a wipe over with battery acid to give the aged look I wanted.

 

[The_Yellow_Ardvark]

The No 1 vice. As I got it.
Seized, rusty and the remains of a bad paint job.

So hot citric acid, removed the rust, followed by a hot caustic what removed the paint.
This allowed the vice to be dismantled.



I was very disappointed with the castings, pitted and a few casting holes. Were the screw sits in the moving jaw was a lump off access metal, it should of been machined away. But it wasn't.



So a few thin coats of filler to reduce the amount of pitting and holes. Not to completely cover them. But just to make painting easy.



This time, after a normal primer I used 2 coats of filler primer.
Rubbing down between coats gave me a decent finish for top coat.




Top coated, clear coat and assembled. New retaining washer and split pin used and a a good application of grease the threads. To help with the workings the slides were waxed.

 

[DennisCA]

Giving my masks a disassembly and cleaning. After doing some 2k epoxy painting I figured they needed an overhaul for when I do some spray painting later.

New filters also ordered. They last many years when you take care of them, the one on the right is 10 years old.

 

[Hood]

Today I did a replica repair of what the Vet did to my dogs leg except I did it to the bandsaw handle and it didn't cost £4K
I have had the bandsaw for quite a while, maybe 5 or 6 years and the handle had been repaired with some sort of epoxy before I bought it. It broke today so I had to make a couple of splints for it.

I also made a handle for the CNC control so that it is easier to pull round when I am manually adjusting. It is made from 12mm dia 316.

I then tried my hand at some friction welding

OOPS or similar was uttered.

 

[Ruffian]

Today I did a replica repair of what the Vet did to my dogs leg except I did it to the bandsaw handle and it didn't cost £4K
I have had the bandsaw for quite a while, maybe 5 or 6 years and the handle had been repaired with some sort of epoxy before I bought it. It broke today so I had to make a couple of splints for it.

View attachment 178171

I also made a handle for the CNC control so that it is easier to pull round when I am manually adjusting. It is made from 12mm dia 316.

View attachment 178172

View attachment 178173

I then tried my hand at some friction welding

OOPS or similar was uttered.



View attachment 178174

Oh that's an inconvenience.
Handy being able to make a couple of splints easily like that.

 

[selectedgrub]

A couple of legs

 

[Tupers]

I put a little trolley together with some old sack truck wheels and casters to move heavy stuff around the workshop.

I think it might need a handle to pull it around with as well.

 

[henry Kadzielski]

^^^ You might need to give it a wheel alignment. Bit too much positive camber on that right rear one

 

[Tupers]

Don’t worry it’s like a beetle. Once it’s got some load on it’ll go negative.

 

[slim_boy_fat]

........I pulled the trigger on 1/2 litre of New Holland Blue which looks a very close match. I can always lighten or darken it by adding white or black in proportion as appropriate.

Looks like I may have guessed right, it's very close - although fluorescent light combined with camera flash isn't exactly 'paint match friendly'.

 

[indy4x]

Nested tables, well not quite but nested wrenches.

Original bench was built so my big Clarke compressor would live underneath. Circumstances have changed and I want a welding bench and plasma cutting table but with limited space they will have to be stored a set of nested tables.

Phone is playing up and not saving all my pictures so only have before and after

Original bench, needs to be shortened so I can get in and out of the garage extension easier and move the legs so they are welded to the corners not set in. This will give me more space for the welding table



It's quite a solid lump, the planks I fitted when it was 1st made and were 2" thick planks planed down to fit inside the bench frame




Then the camera has a hissy fit but essentially legs were cut off, table shortened and legs rewelded onto the corners, timber planks fitted, welding bench legs shortened and feet added. Originally I was going to fit casters to the welding bench but changed my mind at the last minute and used some UHMWPE pucks I had kicking about, drilled a hole and then recessed it to take an M10 coach bolt.

Slides out nicely on the pucks



Then cut the steel top down to fit the shortened bench with the plasma cutter and screwed to the planks and refitted the vice





Now to start planning the plasma table, neighbours don't take too kindly to me using the plasma cutter on out lane and I want something to catch the dross

 

[The_Yellow_Ardvark]

A worrying feeling.
Yes, TYA is a worried Vark.

My Hermes man has just left me with a box.
I, have not ordered anything, nor is work sending me items.
Mrs TYA nor is Mini Me buying me items.

But enough. Here is the box.
View attachment 176777

So, as it was addressed to me, no return address I opened it.

View attachment 176778

Wolf drill and some other Wolf items.

It can only go together one way

So I pit it together in that way,

View attachment 176779

A Wolf pillar drill.

Well that's not true.

It is a paper weight, the drill does not work.
Oh Bother I did not say.

I know who sent me this now. Sorry story, but that's for another day.




Assembled, tested and it was soon found the drill did not work.



The plug was broken, but the cable was shot. Old rubber cable. Testing showed the live side was broken. But the insulation test showed I had 1kohm between cores.
So it was rewired.
That did not fix it.


The rota was the main issue. Ignore the strand of wire wool, that's detritus from cleaning it up. Sadly the windings are broken, I will be hunting for a replacement.



The metal did clean up very well.



Painted and the drill temporary fitted.

As it is a Wolf, no old B&D or Borsch fits.

 

[slim_boy_fat]

Today, between showers of rain and hailstones, this happened......... Welds aren't that great, there was also a gusty breeze [that's my excuse anyway....]





To satisfy my OCD , I've sent off for plastic tube ends for the feet, just to finish it off.

Then, once it was tucked away to wait priming/painting, I made progress with the Record pipe vice




The stand will need scraper/wire wheel treatment before priming. Vice is now soaking in citric acid - will check result(s) tomorrow after Doc visit for bloods. From paint traces, it looks like the vice was originally blue which means it will get the same treatment as the press. Serendipity!

 

[decca]

Made an extension to my metal rack to mount the metal shear.

Saves taking up bench space.