Stuff you have made today

[northwest]

Its okay, started taping board back in 1982, before anyone in Europe had seen it. Not fond of sanding it though I will confess that I can get a far better finish than plastering, which I am useless at. Will use tape on the corners too.

 

[mtt.tr]

Its okay, started taping board back in 1982, before anyone in Europe had seen it. Not fond of sanding it though I will confess that I can get a far better finish than plastering, which I am useless at. Will use tape on the corners too.

Ah tape and joint, im a huge fan of it for ceilings always plaster walls as i find it quicker

 

[Melvyn Best]

Colin Chapman would approve of the bike engine, all lightness and power.

I've got a 1600 crossflow so it wont be setting any records. It's on the red stand next to the engine crane. QUOTE]

I have a 1600 cross flow in mine running full engine management and bike throttle bodies that easily embarrasses a lot of more powerful cars

 

[eLuSiVeMiTe]

New matching stand to free up room for the newish mixer

 

[eLuSiVeMiTe]

And some magnetic labels for good measure

 

[doubleboost]

Fire pit 980 across the flats in 4 mill plate

 

[Kram]

First 5 tiles done! 5 smaller ones left. Got them reasonably level but Im not sure tile surfing is how a profesional would be doing it, but it worked. Trying to do large tiles with fast set adhesive is a challenge!

 

[Guzrik]

Made some grab handles from scrap, pump and sandfilter tray for my pool.
The vessel is filled with sand and it was difficult to grab, big improvement.

 

[roofman]

View attachment 257676 View attachment 257677 View attachment 257678 View attachment 257679 Fire pit 980 across the flats in 4 mill plate

Who supplied the plasma mate

 

[MattF]

Who supplied the plasma mate

 

[The_Yellow_Ardvark]

A box.
Full off Lego.



2 kits in the contents, all in bits and large sub assemblies.

One kit was built.

The other well on it's way.



As a kit it would of be hard with good eyes.
But coffee, shortbread, choccy hob nobs and time made it a lot easier.

 

[Kram]

Earlier a handle for my grout blade. The rubbish plastic ones in shop are no good, needed it a decent length. Couldnt find a second easily accessable m5 hence the m4 and nut.
Now a roast chicken, stuffing and cranbury sandwhich

 

[Kram]

Last four done, just two small pieces to cut out. The gap along the wall will be hidden by a boxed shelf/cupboard.

 

[roofman]

Last four done, just two small pieces to cut out. The gap along the wall will be hidden by a boxed shelf/cupboard.

Will you be making a cupboard around the toilet too

 

[roblane65]

I was going to mention about going around the toilet but thought I'd leave it

 

[roblane65]

View attachment 257676 View attachment 257677 View attachment 257678 View attachment 257679 Fire pit 980 across the flats in 4 mill plate

You gonna sell em flat pack ? what you going to do for the base ? btw when you going to do the casting .

 

[mtt.tr]

This is the second one I've made as last handle went walk about after about a week.


We've got a long winching job tomorrow so opted for a drill adapter.

 

[Dcal]

Today I made my long garden hose more compact.
There's 50m of hose on it and I recon I could probably get another 50 on.



Two coats of epoxy primer and a coat of 2k gloss with a brush helps the look of the reel.
Also made a wall bracket so i can lift it out if needs be.



I couldn't get a right angle hose connector so just brazed one up.

That's one more job struck off the never ending list.

 

[cianh91]

So this trailer arrived like this

and left like this

 

[Brad93]

This is the second one I've made as last handle went walk about after about a week.


We've got a long winching job tomorrow so opted for a drill adapter.

View attachment 257803 View attachment 257802 View attachment 257801

Did you mill the splines? Is that off the Harrison?