- Thread starter monkeymark
- Start date
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,558
- Location
- Leeds, West Yorkshire
Brad93
Member
- Messages
- 18,493
- Location
- Essex, United Kingdom
Jones & Shipman Bench Centres
For shaft inspection, truing, balancing.
A little lathe really with no motor.
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,558
- Location
- Leeds, West Yorkshire
Pete.
Member
- Messages
- 14,479
- Location
- Kent, UK
It'd make a nice lamp.
Wash your mouth out!
Similar to mine Brad. Looks like the same length but yours is a bit heavier. Mine doesn't have the hold-down tabs.
brightspark
Member
- Messages
- 40,321
- Location
- yarm stockton on tees
a quick lick over with a 1.0mm slitting disk will soon put some teeth back on
I have an old large pair and the adjusting nut was well worn slit it open crimped it up a bit and welded it back together as good as new now
Seadog
Save the planet. It's the only one with rum!
- Messages
- 12,240
- Location
- NE London - UK
Melvyn Best
Member
- Messages
- 1,592
- Location
- Cambridge
Dick Turpin??
Brad93
Member
- Messages
- 18,493
- Location
- Essex, United Kingdom
It’s not the greatest casting, It does have a few voids but won’t affect its use.
I’m pleased with it.
Will come in quite useful.
johnny7
Member
- Messages
- 373
Had a steady amble around the bootsale this morn and picked up a Chinese catty and a case for a 8x30 sized binocular! (Got loads of bins missing their cases!!) Grand total of two sovs for the pair!
Also won this half whiskey barrel off fleabay to stick an Acer tree in (It keeps blowing over in the narrow bottomed one that it's in now
)
Got it home to find a rotten patch that's very soft, I've half a gallon of wood hardener in the garage so it looks like it'll need a lick of of that slopping on
The tree that'll reside within! The barrel is much wider and more so at the base! The tree is lashed to two bins at the mo, It was lashed to one but they had blown over this morn
Pretty sure i'll have to smash the pot off it as there's nowt but roots inside and it reduces in diameter at the top edge, It's the wrong time of year to do this so I think i'll have to slip pot it, It seems it's dying, Half the tree has already perished (The pic above is a couple of years old!)..
John
Also won this half whiskey barrel off fleabay to stick an Acer tree in (It keeps blowing over in the narrow bottomed one that it's in now
)Got it home to find a rotten patch that's very soft, I've half a gallon of wood hardener in the garage so it looks like it'll need a lick of of that slopping on
The tree that'll reside within! The barrel is much wider and more so at the base! The tree is lashed to two bins at the mo, It was lashed to one but they had blown over this morn
Pretty sure i'll have to smash the pot off it as there's nowt but roots inside and it reduces in diameter at the top edge, It's the wrong time of year to do this so I think i'll have to slip pot it, It seems it's dying, Half the tree has already perished (The pic above is a couple of years old!)..
John
EddyP
Member
- Messages
- 717
- Location
- Northants
I'm curious, you seem to be collecting enough stuff to restart the British Industrial Revolution, what does your place produce?
Brad93
Member
- Messages
- 18,493
- Location
- Essex, United Kingdom
Sweet FA at the minute haha!
I’ve been selling a lot of equipment off recently actually.
Collecting the mills is the priority now.
What with Spencer and Pressbrake just round the corner, I don’t think there’s a lot that couldn’t be built in our little corner of the world.
Pete.
Member
- Messages
- 14,479
- Location
- Kent, UK
First boot fair of the year, I got a few bargains.
Small electric chain saw for £5. Had a short bit of lead on it (like 6" long). A new flex and sharpen the chain and it's raring to go.
Four bench stones for a quid
A bosch drill again for a fiver. Worked fine except the chuck was knackered. I have an old Dewalt drill that the battery long ago died. Chuck went straight on it.
Small electric chain saw for £5. Had a short bit of lead on it (like 6" long). A new flex and sharpen the chain and it's raring to go.
Four bench stones for a quid
A bosch drill again for a fiver. Worked fine except the chuck was knackered. I have an old Dewalt drill that the battery long ago died. Chuck went straight on it.
brightspark
Member
- Messages
- 40,321
- Location
- yarm stockton on tees
nice find I went to ruffoth autojumble and came back with 3 rolls of masking tape
cant win em all
123hotchef
Member
- Messages
- 14,213
- Location
- Kent
I got 1 ton of steel. 
123hotchef
Member
- Messages
- 14,213
- Location
- Kent
