Today I acquired...........

[slim_boy_fat]

@slim_boy_fat
No it is BBC tonight.
Beer.
Boobies.
Curry.

In any particular order?

 

[Barking Mat]

@slim_boy_fat
No it is BBC tonight.
Beer.
Boobies.
Curry.

Thèse are a few of my favorite things. Thé hills are alive..
.

 

[angellonewolf]

@slim_boy_fat
No it is BBC tonight.
Beer.
Boobies.
Curry.

boobies
beer
curry
boobies again if your lucky

 

[paulmitchell1984]

Been toying with them for a while, but bit the bullet and bought some toughbuilt saw horse so I can get a solid base for making stuff on as the workbench in garage isn't big enough for me to throw stuff around easily.

Just need to source some 2x4 and some ply to make the worktop now

 

[The_Yellow_Ardvark]

boobies
beer
curry
boobies again if your lucky

2boobies two hands.
I think a design was worked out there.

 

[nickk]

This slippery stuff.

 

[Kram]

Induction hob mat and bearing for spraying stuff on.

10" is here, #4, the cheaper one, £7.
www.amazon.co.uk/gp/aw/d/B07L9MGJSR

 

[The_Yellow_Ardvark]

Today was a:
Acquire stuff.
Liberate stuff
Dump stuff day.

4 bags of green waste to the dump. Plus 5 bags of striped elec insulation(That was not even cold before they had it away. How we mocked as tey gave me the bird as we left.

We also liberated some more bits for a Up and coming MIS.
A big thanks to the kind member, from here.
Sorry about Green back.



2 small tube lights. They will be turned into a light box at a MIS, the Alloy hinge is also in a MIS.

A tin of biscuits.



Plus a decent B&D single speed drill.



In the tin was.



I liberated a small fret saw and a old Wicks lathe.
Both need lots of TLC.



Yes, I have the tailstock.

That was for others.
But this TYA got stuff.



Old pot fixing washers (cork and steel) Plough plane, another hammer and a small Hatchet copper soldering iron.
@Parm
@angellonewolf
NO!!!!!!!!!!!!!!!!!!
MINE ish for now.

There is more.



1/4 action Civil defence pump.
Or one lump of fused steel.

Plus another vice.
A blue vice.

But vices are 2 a penny here.
But this one is not a normal vice.
It is my vice.

 

[The_Yellow_Ardvark]

But the biscuit tin did contain some biscuits

See................................

 

[eLuSiVeMiTe]

A birthday present for my youngest.

Have a early oset in the shed. It's tired and has poor speed curve control. Asked my mother nicely and traded this for fitting laminate flooring in her kitchen and bedroom


It's been ridden four times. Needs new batteries though.

My youngest is chuffed as he's a bit small for the 16"

 

[eLuSiVeMiTe]

Been toying with them for a while, but bit the bullet and bought some toughbuilt saw horse so I can get a solid base for making stuff on as the workbench in garage isn't big enough for me to throw stuff around easily.

Just need to source some 2x4 and some ply to make the worktop now

View attachment 282352

Been using these a while now.
Can't fault them

 

[500e]

Found in a skip 3phase will sort speed control & I have the makings of a good welding rotater, there was the rest of the tire changer attached it runs ok, even rev switch works

 

[Maker]

Today was a:
Acquire stuff.
Liberate stuff
Dump stuff day.

4 bags of green waste to the dump. Plus 5 bags of striped elec insulation(That was not even cold before they had it away. How we mocked as tey gave me the bird as we left.

We also liberated some more bits for a Up and coming MIS.
A big thanks to the kind member, from here.
Sorry about Green back.

View attachment 282388

2 small tube lights. They will be turned into a light box at a MIS, the Alloy hinge is also in a MIS.

A tin of biscuits.

View attachment 282389

Plus a decent B&D single speed drill.

View attachment 282390

In the tin was.

View attachment 282392

I liberated a small fret saw and a old Wicks lathe.
Both need lots of TLC.

View attachment 282393

Yes, I have the tailstock.

That was for others.
But this TYA got stuff.

View attachment 282394

Old pot fixing washers (cork and steel) Plough plane, another hammer and a small Hatchet copper soldering iron.
@Parm
@angellonewolf
NO!!!!!!!!!!!!!!!!!!
MINE ish for now.

There is more.

View attachment 282398

1/4 action Civil defence pump.
Or one lump of fused steel.

Plus another vice.
A blue vice.

But vices are 2 a penny here.
But this one is not a normal vice.
It is my vice.

View attachment 282397

I had one of those lathes years ago (Might have been my first "Machine" actually) , mine was branded SIP but was otherwise identical. The tailstock is an absolute piece of crap, it takes forever to change the spindle speed and the tool rest is a pain to adjust. Somehow I got more for it on eBay than Axminster would sell you a brand new one.

 

[Barking Mat]

found in a skip
View attachment 282440View attachment 282441View attachment 282442

Whats that ? Difficult to tell on my phone.

 

[500e]

3 phase motor 1400 rpm 0.55 Kw with belt reduction into a gear box from tire changer big shaft have the top plate as well

 

[brightspark]

Couple of dolls

a couple of gollies used to save the paper ones get ten of them off the robertsons jam jars send em in and you got an enamel badge

 

[Barking Mat]

a couple of gollies used to save the paper ones get ten of them off the robertsons jam jars send em in and you got an enamel badge

Ooh, no longer politically correct.

But nice find.

 

[Barking Mat]

Wife used to collect them, gone now.

 

[Barking Mat]

She had 30 or 40, caréers, nurse, doctors, then they became non PC.

 

[Ctreanor13]

a couple of gollies used to save the paper ones get ten of them off the robertsons jam jars send em in and you got an enamel badge

If you know anyone willing to sell one of them badges I'd be willing to buy. I've been after one for my dad's badge collection on his hat for years. Been let down on ebay several times as well at local markets