- Thread starter monkeymark
- Start date
Barking Mat
Cuddler of hedgehogs.
- Messages
- 12,922
- Location
- France, Brittany.
I disagree strongly...Drunk way too much Pelforth at LeMans once, never again!
I call it Pelfilth now
Barking Mat
Cuddler of hedgehogs.
- Messages
- 12,922
- Location
- France, Brittany.
I also picked up 25 m of 4g6 SY câble, thé bloke practically gave away, i mean 8 quid ???
And this little 10w led lamp, it works, but thé batteries are dead.
Says clearly on it, batteries can't bé changed, boff to that, just dismantled it and ordered two new ones off eBay.
Can't bé changed, my bottom, just needs a little fettling.
And this little 10w led lamp, it works, but thé batteries are dead.
Says clearly on it, batteries can't bé changed, boff to that, just dismantled it and ordered two new ones off eBay.
Can't bé changed, my bottom, just needs a little fettling.
Pete.
Member
- Messages
- 14,384
- Location
- Kent, UK
Today I acquired - a new printer.
Well it's not new but nearly new just reporting an error. Guy at work lost his rag with it and got a new one. I brought it home and found an air duster straw inside preventing the print head from parking properly.
Mine for a couple of hours fault-finding - £300 new
Well it's not new but nearly new just reporting an error. Guy at work lost his rag with it and got a new one. I brought it home and found an air duster straw inside preventing the print head from parking properly.
Mine for a couple of hours fault-finding - £300 new
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,627
- Location
- Going Away.
That is not what we need to know on a welding forum. Please google a medical forum please.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,627
- Location
- Going Away.
Today.
Was good.
Easy few jobs, a nip into a charity shop and a dash to a friend, who has coffee.
Work gave me a box, charity shop gave me a few bits and a friend gave me some bits.
The box on my still untidy bench.
My friend gave me this.
A old pan, will be used to heat caustic soda up and a coil. It may fit a dead engine I have got.
Good coffee, thank you.
From the charity shop.
Old style 6volt emergency road side lamps. They do work.
Plans?
Time will tell me.
A Pair of Mitre clamps.
A Name I have not came across before.
Then a nice old Mitre clamp.
It has a very nice clamping method.
The 2 round items a driven from below.
This is the underside.
As you apply pressure the round items are turned forcing the joint tighter.
A Multi Meter, the charity shop could not sell it, as it is a un tested electrical item.
Don't get me going on that.
No, Not Davy Lamp.
Mine.
Oh yes, another fire extinguisher.
Was good.
Easy few jobs, a nip into a charity shop and a dash to a friend, who has coffee.
Work gave me a box, charity shop gave me a few bits and a friend gave me some bits.
The box on my still untidy bench.
My friend gave me this.
A old pan, will be used to heat caustic soda up and a coil. It may fit a dead engine I have got.
Good coffee, thank you.
From the charity shop.
Old style 6volt emergency road side lamps. They do work.
Plans?
Time will tell me.
A Pair of Mitre clamps.
A Name I have not came across before.
Then a nice old Mitre clamp.
It has a very nice clamping method.
The 2 round items a driven from below.
This is the underside.
As you apply pressure the round items are turned forcing the joint tighter.
A Multi Meter, the charity shop could not sell it, as it is a un tested electrical item.
Don't get me going on that.
No, Not Davy Lamp.
Mine.
Oh yes, another fire extinguisher.
Melvyn Best
Member
- Messages
- 1,552
- Location
- Cambridge
Try doing a FWD clutch on a 4 poster
Mr Fro
Member
- Messages
- 505
- Location
- Bury st Edmunds-ish
I just happen to have a Royale engine and gearbox in a garage if you're interested.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,627
- Location
- Going Away.
That's why a good one comes with a sliding jack.
jordhandson
Member
- Messages
- 1,446
- Location
- Dorset
Here yah go winchman it started as a Thwaites skip dumper and father wanted a forklift and as the tusker has great turning circle and the hydraulics it was the best way to go, also this one is electric start. Father picked up a Cameron Gardner tractor rear mounted forklift.
And I made up a frame copying the tusker digger frame so it can be removed easy if ever needed. It will lift more than we ever needed
I did make a weight box on the rear and filled it with 56lb weights off the top of my head there about 500lbs of weight in there which helps enormously
and if say I lift more than a ton and a half I stick some breeze blocks on the back box. Heaviest I have lifted is about 2 ton. Father’s happy with it best bit of kit on the plot.
mrsbruce
Member
- Messages
- 1,974
- Location
- Livingston, Scotland
Not today, but a few weeks ago, a kind young gentleman on this forum sent me some gifts
. In the box was another lovely leather hitty hammer, and a bag of sweeties.
Oh, and two little bunnies, but they escaped, leaving behind the red ribbon and bells from around their necks (Honest guv).
Last week, I was having a blether with one of my customers on the phone, when I mentioned I was attempting to learn to weld. He very kindly sent me a lovely pair of brand new tig welding gloves he had lying about his workshop. They even fit.
Also after a chat with a customer about air powered Colt .45 he had just bought, he sent me a spare bullet for me to check out. I get a lot of people buying holsters for these pellet firing guns. I’d alway wondered what they looked like in the flesh, so he popped one in the post for my perusal.
It’s good to have nice customers (and nice forum members).
. In the box was another lovely leather hitty hammer, and a bag of sweeties.Oh, and two little bunnies, but they escaped, leaving behind the red ribbon and bells from around their necks (Honest guv).
Last week, I was having a blether with one of my customers on the phone, when I mentioned I was attempting to learn to weld. He very kindly sent me a lovely pair of brand new tig welding gloves he had lying about his workshop. They even fit.
Also after a chat with a customer about air powered Colt .45 he had just bought, he sent me a spare bullet for me to check out. I get a lot of people buying holsters for these pellet firing guns. I’d alway wondered what they looked like in the flesh, so he popped one in the post for my perusal.
It’s good to have nice customers (and nice forum members).
Why did you have 56lb weights on your head?Here yah go winchman it started as a Thwaites skip dumper and father wanted a forklift and as the tusker has great turning circle and the hydraulics it was the best way to go, also this one is electric start. Father picked up a Cameron Gardner tractor rear mounted forklift.
View attachment 287581
And I made up a frame copying the tusker digger frame so it can be removed easy if ever needed. It will lift more than we ever needed
View attachment 287582
I did make a weight box on the rear and filled it with 56lb weights off the top of my head there about 500lbs of weight in there which helps enormously
View attachment 287583
and if say I lift more than a ton and a half I stick some breeze blocks on the back box. Heaviest I have lifted is about 2 ton. Father’s happy with it best bit of kit on the plot.
Melvyn Best
Member
- Messages
- 1,552
- Location
- Cambridge
But have you actually tried doing one?
Agroshield
Member
- Messages
- 5,431
They have been around a while. See: https://gracesguide.co.uk/Hobbies . Currently look like this: https://www.hobbies.co.uk/ . I would put them in a similar sort of historical development to Tyzak or maybe Buck & Hickman - name still exists but very different to the past.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,627
- Location
- Going Away.
Yes.
I often help my friend who owns a garage, with 3 x 4 post ramps.
Car on ramp, rear wheel lockers on (wedge shape wood.
Jack up the front, under the jacking points, wheels off, hub nuts off. Then what is required to allow the shafts to be removed.
Gear box jack under the box, box out, cutch out.
Reverse.
The most common issue people have is not putting the jacking beam in the right place, or not using the jack legs to assist in getting the height out.
Cobbler
Codger bodger
- Messages
- 7,669
- Location
- Gloucestershire UK
Cameron Gardner used to be not far from us. Closed years ago.
8ob
Member
- Messages
- 13,846
- Location
- Nescient in the vale
Probably not to be recommended but I used to chock up our front wheel drive motors on the end of the ramp so the engine/gearbox was just clear, ratchet strap the back down as a good measure although not really needed and then lift them up. It gave clear working room around the mechanicals, better than the two poster I have now.
Bob
dan.taylor.1
General Tinkererer
- Messages
- 2,727
- Location
- Kendal, Cumbria
It's doable but far far easier on a 2 post. In fact there's very little I struggled to do on a 2 post in my stint as mechanic.
Onoff
In the land of the unfinished project I am King!
- Messages
- 11,673
- Location
- Sevenoaks, UK
More a case of "today I decided to dig out". Tbh only then because I need to make space for this load of box section I scored.
This old planer has been in one half of my tumbledown stable since we bought the place (20 years ago). Came with the house so to speak. Might be my next project after the workmate.
This old planer has been in one half of my tumbledown stable since we bought the place (20 years ago). Came with the house so to speak. Might be my next project after the workmate.
