Rannsachair
Forum Supporter
- Messages
- 3,981
- Location
- Lochgilphead, Argyll, Republic of Scotland
A handy angle plate:
- Thread starter monkeymark
- Start date
brewdexta
The biggest tool in the box
- Messages
- 5,606
- Location
- UK
A Mikrotik wireless router with 5db gain antennas and a nice wall mounted PoE injector so I can stick it in the loft. The walls on the house are millstone grit with a high iron content plus lots of foil backed insulation means I get wifi black spots.
Also a couple of DIN rail brackets for SSRs.
Also a couple of DIN rail brackets for SSRs.
Blobber
Member
- Messages
- 2,543
- Location
- lincolnshire
I really need to get around to doing something similar, walls are thick and old here as well as the owner!
roblane65
Member
- Messages
- 2,193
- Location
- Newcastle UK
They look good
Hood
I am obsessed.
- Messages
- 17,308
- Location
- Carnoustie, Scotland
Aye, satin black as suggested by someone, can't recall who.They look good
Hood
I am obsessed.
- Messages
- 17,308
- Location
- Carnoustie, Scotland
I do it every night, then I wake up
Rannsachair
Forum Supporter
- Messages
- 3,981
- Location
- Lochgilphead, Argyll, Republic of Scotland
Panbride - Dundee more likely than Paris-Dakar
Mick Annick
Forum Supporter
- Messages
- 2,631
- Location
- Burgundy, France (450 miles SE of Somerset)
It’ll be white one-piece leathers next, there’s no turning back now power ranger!
Hood
I am obsessed.
- Messages
- 17,308
- Location
- Carnoustie, Scotland
I will pass on that, no enough coos in the world to make it.
Arc Tourist
Member
- Messages
- 4,894
- Location
- Wales
It was white back in the 80's, that gave you the incentive to stay well ahead of the pack.
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
Today again a delivery from Myford country.
Obtained from a well known British dealer in the hope of finally being able to properly level my ML7 and get at every corner of the machine again:
.... but according to the customs papers country of origin: India .....
I can't say that I would now drop to my knees out of enthusiasm for the quality of the goods.
I have seen better ... and much better ....
I now have to measure and compare for parallelism and height - if the hole pattern was right, that wouldn't be all bad either - if that's all ok, I won't grumble about the aesthetics - but I'm getting ready for less aspirational results ...
The pieces in the pictures in the offer of the dealer looked clearly different.
Having a handwheel at the end of the lead screw turned out to be desirable.
It fits, but seems to come from the same dark corner of the city on the subcontinent ...
Let's say: I am less than impressed.
If the parts work in the end it should be good so far - but the stuff also cost money , that was not directly a bargain.
Our problem over here, of course, is that there is no Myford used (replacement) parts (flea) market.
So we must order everything from someone somewhere ...
Buying an English machine in my own country of machine builders - after Brexit - was perhaps not one of my best ideas.
But:
It'll be fine
in the end,Carsten
--
Hood
I am obsessed.
- Messages
- 17,308
- Location
- Carnoustie, Scotland
Yer a bit slow on the uptake son
