Today I acquired...........

[DAPPH]

New toys to go with my new toy.

View attachment 383133

This was a kit from Nik and Trick, which doesn't include a stop bath for some reason, but is everything you need to develop B&W film. Except darkness, they'd sold out of changing bags.

No real logic to my film selection, Superpan has some infrared sensitivity so that sounds cool (Rollei Infrared was sold out), Delta 3200 is obviously much faster, and Shanghai GP3 is cheap, FP4, Delta 400 and HP5+ (Which I seem to have lost already) are just bog standard B&W, no idea how they differ, I just picked what I'd heard of.

Changing bags , make your own out of back to back thick velvet , the bigger the better up to about 2 foot square with elasticated sleeves . cuffs at two adjacent corners
In our club we used to have a load of the old fashioned bottle & can openers to take the cap off the canister of film .

Stop baths can be black plastic seed trays , do you have any safe lights ?

 

[Maker]

I thought about making one (Or asking mum to do it), but you can buy one for less than twenty quid, you'd probably pay more for the material.

I meant no stop chemical, not the bath itself, I've got the tank to develop negatives and won't be doing prints (yet) so don't need trays. I don't think you strictly need the stop, as long as you thoroughly wash the developer off before fixing (or maybe my first roll will be a disaster). I don't have a safelight, it wouldn't really be very useful if I'm not tray developing, and all the film I've bought is panchromatic anyway, so the light wouldn't be very safe.

 

[gaz1]

I think the easy way out might be to see if I can set up a totally new account and re set everything that uses the Microsoft monster with an up to date email address , though I'm not sure if they will treat my email addresses which are children off my wife's main email address as valid or just keep sending me round in ever decreasing circles till I disappear up my own orifice .

Funnily enough I got a new Dell laptop last week...i also needed a Microsoft account too which I thought was really odd. Its like the operating system is linked to my Microsoft account...haven't had time to look into it but definitely something has changed in this version.

you can bypass

 

[Pigeon_Droppings2]

you can bypass

Thats excellent cheers....time to do a factory reinstall me thinks!

 

[gaz1]

Thats excellent cheers....time to do a factory reinstall me thinks!

i will give you this worth a watch as helpful

 

[Wedg1e]

New toys to go with my new toy.

View attachment 383133

I used to have Paterson developing gear back in my teens - another hobby that when I had the interest, I didn't have the funds. Now I could buy anything I want, I've lost interest. Same with ham radio, astronomy, cars...
I was at school with a guy who was into photography. Last time I saw him ('82?) he was wearing a khaftan, carrying an old Nikon and coming out of the local park with a girl who, I presumed, had been 'posing'
Now he's world-famous (sort of)...

gavin evans- autofocus

Gavin Evans is a British photographer based in Berlin, renowned for his uncompromising take on portraiture and outspoken views on photography. Viva!

www.gavinevans.com

 

[Farside]

Let me guess, this video brought you to them?

Carsten

--

No, long before that. Oddly, there was no information on the inside workings, I'd bought it thinking it was just a strike-through driver.

 

[Farside]

, which doesn't include a stop bath for some reason,

Vinegar.

Using Vinegar as a Stop Bath

For those who have garnered consistent results from using vinegar in film/print processing, what type (cider, distilled white, etc.) is recommended, and should it be diluted or not?

www.photrio.com

 

[DAPPH]

i will give you this worth a watch as helpful

Oh my giddy aunt , I've definitely lost the will to live after ploughing through that lot ... I've just booked and paid for a slot with Pure Cremations

 

[droopsnoot]

I don't think you strictly need the stop, as long as you thoroughly wash the developer off before fixing (or maybe my first roll will be a disaster).

Back in the day, I took CSE and O-level photography and learned how to process films in school. Because they never had any, we never stop bath for films or prints - just a good rinse in plain water.

- another hobby that when I had the interest, I didn't have the funds. Now I could buy anything I want, I've lost interest. Same with ham radio, astronomy, cars...

I've had the same - it's somehow more fun when you have to save up for stuff. I used to collect records by a certain band, and there were some "holy grail" items that were massively expensive back then, whereas I could just about stretch to £7.99 for a Japanese import album. All through my working life I'd have been able to buy any of the really rare things, but it just wasn't the same. With the benefit of hindsight, of course, I wish I had as I see things that were massively expensive then selling for incredible amounts now. Oh well, best not to think about it.

 

[Sergei Slovenija]

Here they have already shown a set for threading, an American company. Looked for this one. I believe Makita ordered under her own brand. Not all holder sizes are available, but enough for me. The knurling tool is new, never saw work and was not clamped in the tool holder. Small rust spots, easy to remove.

 

[slim_boy_fat]

....they'd sold out of changing bags.

I have one here you can have for the postage costs, left over from the days when I had my own darkroom setup. In the last few years it's only been used when folk would bring me their camera to remove a film cassette.

Iirc, there's also a tool for retrieving the end of a roll of film which has been wound fully back into the 'can' which you can have if it's any use to you (and it will be, too ).

Have a Google for Nova deep printing tanks, great for developing prints, and the design saves clearing up after each session. (pricey though....)

 

[mr_luke_too]

I thought about making one (Or asking mum to do it), but you can buy one for less than twenty quid, you'd probably pay more for the material.

I meant no stop chemical, not the bath itself, I've got the tank to develop negatives and won't be doing prints (yet) so don't need trays. I don't think you strictly need the stop, as long as you thoroughly wash the developer off before fixing (or maybe my first roll will be a disaster). I don't have a safelight, it wouldn't really be very useful if I'm not tray developing, and all the film I've bought is panchromatic anyway, so the light wouldn't be very safe.

I've been into film photography for a few years now. Picked up an old box brownie at the local tip for 50p and ended up spending a fortune on more old cameras, gear, etc.! Anyway, I've never used stop bath - just relied on washing it thoroughly and haven't noticed any problems as a result. I wash the film using the "Ilford Method" which is quick and easy.

Once mixed, your Adofix fixer can be reused for several films, although it will gradually start to take longer and longer to work. Most developers are single-use, but I haven't any direct experience with Hydrofen. For the last couple of years I've been stand-developing using Rodinal at 1:100 for extra cheapskate and laziness points!

 

[Kram]

A slackline, have been playing on one at local climbing wall. Seen what some of the others can do, its something that will need plenty of practise!

https://www.amazon.co.uk/dp/B0B6PTJQB9

(An 18m long ratchet strap for walking on between trees.)

 

[Sergei Slovenija]

I saw a sale with a huge discount on turning inserts from CBN, I could not resist.

 

[The_Yellow_Ardvark]

Free.

For being nice.

 

[gaz1]

Oh my giddy aunt , I've definitely lost the will to live after ploughing through that lot ... I've just booked and paid for a slot with Pure Cremations

i just use the program to do many things on windows 10

yeah it might be windows 10 but that program will change its view to what you like
i like the one click app remover myself

 

[RWD3M]

I gave a pal a hand today to collect a circa 1970 Suzuki something-or-other, and returned with this:

It came from his late father and once cleaned will be pressed back into service. I have no idea what I'll make on it but I'm sure I'll come up with something!

However, can anyone tell me what make it is? There are no identification plates on it that I can see, aside from the generic one on the side of the motor.

 

[fizzy]

I gave a pal a hand today to collect a circa 1970 Suzuki something-or-other, and returned with this:

View attachment 383232

View attachment 383233

View attachment 383234

It came from his late father and once cleaned will be pressed back into service. I have no idea what I'll make on it but I'm sure I'll come up with something!

However, can anyone tell me what make it is? There are no identification plates on it that I can see, aside from the generic one on the side of the motor.

Not sure but looks very useful.

 

[fizzy]

Today I received a good bargain. Genuine Pratt Burnerd D1-8 backplate. Mint condition. Never been uses still in the original box. Now all I need to find is a big collet chuck!