Today I acquired...........

iNf · Jan 31, 2024

roblane65 said:
Back end of last week I acquired a mini four jaw for the mini lathe
View attachment 435989
but what didn't I ask ( or rather read in the ad !) it's an independent four Jaw , well is the just going to make the tinkering with the new toy a total pita. it may not get fitted

Would've thought an independent was more useful than self centering?

cheb · Jan 31, 2024

Onoff said:
Afaiac it's just yet another example of the breakdown of societal norms and standards. Next, people will be starting their sentences with acronyms!

Who's doing that?

iNf · Jan 31, 2024

cheb said:
Who's doing that?

IDK

Arc Tourist · Jan 31, 2024

Robotstar5 said:
My MG ZS had a standard steel wheel as a spare, same problem as you, it would not fit over the front brake caliper.

So, its not just an isolated situation with Dorothy's Audi A1.

roblane65 · Jan 31, 2024

iNf said:
Would've thought an independent was more useful than self centering?

Possibly if you've one iota of what your mean't be doing :whistle:

clocking what's that !

cheb · Jan 31, 2024

iNf said:
IDK

FWIW neither am I. An acronym is not just the initial letters of a series of words, it has to be pronounceable, like RADAR, LASER or NASA for example.

droopsnoot · Jan 31, 2024

Arc Tourist said:
The boot on my Wife's car only has room for a space saver instead of a proper tire & wheel. We got a front tyre flat, and found that the space saver spare would not work on the front hub as it jammed the brake unit against the disc. I had to remove a rear wheel and install it on the front, then install the space saver on the rear in order for the car to be drivable again.

And then, if it's anything like my car, you have to find somewhere to put the wheel you've taken off because it won't go in the boot. Audi's recommended location is the passenger seat, though I'm not sure every TT driver never has a passenger sitting there.

m_c · Jan 31, 2024

cheb said:
FWIW neither am I. An acronym is not just the initial letters of a series of words, it has to be pronounceable, like RADAR, LASER or NASA for example.

LASER focus on the issue I see you have :rolleyes:

Arc Tourist · Jan 31, 2024

droopsnoot said:
And then, if it's anything like my car, you have to find somewhere to put the wheel you've taken off because it won't go in the boot. Audi's recommended location is the passenger seat, though I'm not sure every TT driver never has a passenger sitting there.

I had to fold down the back seat to accommodate the punctured tyre and other items.

arian · Jan 31, 2024

cheb said:
FWIW neither am I. An acronym is not just the initial letters of a series of words, it has to be pronounceable, like RADAR, LASER or NASA for example.

Not sure that's right. Long article on Wiki (but citing Wiki is like using dictionary definitions back in the day).

The_Yellow_Ardvark · Jan 31, 2024

These, plus 4 more. As out of date.

Number Stamps.

A wake me up tool.

Craig-SM · Jan 31, 2024

More Milwaukee in the form of 1/2” Router kit, packout case was quite a bit bigger than I expected. Just need need to get some 1/2” bits now although it comes with smaller size collets including 1/4”

roblane65 · Jan 31, 2024

Was over at Carrs Billington ( agri merchants ) in Hexham got a few milwaukee blades and new style hex bits to try

also a 10mm thunderweb drill bit to replace the one I snapped in me good set and while there picked up a pair of Hoggs field pro neo wellies for the young un ( :laughing:

he' 29 )

weren't cheap but seem good quality and if they last as long as my toggi's I'll be happy I think he will be for the warmth too .

Robotstar5 · Jan 31, 2024

The_Yellow_Ardvark said:
View attachment 436085

A wake me up tool.

I remember when they had a crate of those in my local surplus shop, the bottom cap had different coloured lenses in, I bought a couple to keep in the car.

bricol · Jan 31, 2024

iNf said:
Did you take a photo of the pothole and tyre with measurements? Put a claim in to local authority

No - it was dark, damp, flowing water, narrow, steep hill, cars using it irregularly.

I might take a look Friday afternoon, but a colleague had to deal with Bradford council over the same thing - damaged tyre and wheel - I'm not sure I want to be sending the amount of info they appear to require - copy of the V5, insurance details etc - for the same of a 70 quid tyre, I don't want my insurance company banging up my risk and all my policies taking a hit. Seemed very time consuming.

And then they told him it was in Calderdales area, so he's got to do it all again . . .

i've got a good tyre, but worn more than the one, in the shed - shove that on the wheel to get me through to April/May time.

badabec · Jan 31, 2024

Essex County Council rejected my claim for a pot hole damaged tyre. They passed the buck onto the company that resurfaced that particular stretch of road. I tried to claim off them. They replied that the Council had specified an unsuitable grade of tarmac for that corner.
Went back to the Council, they finally accepted the claim. It was only for £30 (this was 10 or so years ago). They needed the receipt. Sent in the receipt. Then the Council said that as I had paid cash I would need written confirmation that I had actually paid.
The amount of time and effort the Council spent must have cost far in excess of my claim.

The latest wheeze is if the Council haven't been informed of the pot hole by Joe Public, then the Council can't be held liable for the damage as it didn't know the pothole existed.

Onoff · Jan 31, 2024

I heard the other day how much the local contractors get paid per pothole. Can't remember the figure as I'd had a few.

It's funny how the same potholes appear, in the same place, continuously. Sometimes after a period of heavy rain. I kid you not.

Whole system is a fit up. Down the tip you can't take any "rubbish" you see. Doesn't stop the staff putting choice bits aside though. "Cable mate? Stick it in the pile behind the scrap metal bin!"

brewdexta · Feb 1, 2024

I wanted a small, cheapish whitworth socket set to keep down one end of the workshop where most of the old machines are. This Sealey premier 3/8 drive set for 13 quid fit the bill.

I wanted some 1/4" whitworth brass countersunk sets screws for the Wadkin saw I'm doing up. Probably got some lurking in the barn somewhere but I was working away from home and needed a bit of retail therapy.

Finally, I was browsing evil-bay and spotted that a seller called Portsmouth light engineering was selling a batch of Meddings drill will gear shafts, and I needed one for one of mine. 50 quid but saves me a load of time renovating the original shaft and gets the drill working.