Today I acquired...........

[MattF]

Where are the good, or any Junk Yards in South Wales ?

Wouldn't the answer just be "South Wales"?

 

[The_Yellow_Ardvark]

Random second hand shop, over the boarder in Wales.

A series of box's, marked up unknown tools.
No details.
Pick up, guess and make an offer.

I chose one, had 4 to chose from.
This one made a decent "rattle noise".
The moneis raised went to:
Guide dogs for the Blind.
Air Ambulance.
Life Boat fund.

3 good reasons to part with a brown bit of paper, has a picture of Lizzy 2 on it.



Yes, an turn of the century brass door nob.

Oh hum.
..
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
Plus.

Beer can, nearly empty for scale.
Pruning sheers, slip jaw pliers, cheep crimpers, adjustable spanner, 5 torches and Chubb lock.

The crimpers are cheep and shot, but.
They yielded a decent set of grips for Mini Me set. She uses hers to sheer of Brass etc. screws, not crimping.

The Chubb lock is old, but original keys.
The torches all work, but 2 do need the batteries removed and contacts cleaned.

 

[Arc Tourist]

Wouldn't the answer just be "South Wales"?

I don't think so, otherwise I wouldn't have bought a second home here from half way across the world. Love it here, clean air, pure water, and real whipped cream in your bakery goods; unlike across the pond. Aahhh, real cream Donuts. I can almost feel my arteries hardening.

 

[Arc Tourist]

Random second hand shop, over the boarder in Wales.

A series of box's, marked up unknown tools.
No details.
Pick up, guess and make an offer.

I chose one, had 4 to chose from.
This one made a decent "rattle noise".
The moneis raised went to:
Guide dogs for the Blind.
Air Ambulance.
Life Boat fund. ................................

Guide Dogs for the Blind, my favourite charity. I went through a spell of blindness for about five months back when I was 40 years old, worst feeling ever, a living nightmare. I had the means and came very close to topping myself as you call it over here. They got the infection under control and gradually I regained vision. I've appreciated every day since over the last 24 years.

 

[The_Yellow_Ardvark]

Each of those charities I will give freely, I have need to use them all.

But I like the fact they don't chug for money and they show of the good work they do.
Also, not PC, I know. They are for the UK.

 

[Shox Dr]

Hedgehog fleas. Yes you read it

 

[Dieselman 63]

Hedgehog fleas. Yes you read it

That’s not mange is it? Really nasty mites.

 

[Shox Dr]

That’s not mange is it? Really nasty mites.

No proper Hedgepig fleas. My work mates dog had been rolling one arounf the garden yesterday. I felt one on the back of my neck as soon as stood up from playing with him this afternoon. Managed to flick it on the the welding table and flattened with a BFH. Soon to be followed by 3 in my socks. Looked at the dog and was crawling with the little darlings

 

[DennisCA]

Depends on the grade, some of the softer grades and it is almost impossible to turn without some sort of coolant, other harder grades just chip away nicely if you get the feeds and speeds right.

Is there any way to determine the grade? I doubt there is for the home shop hobbyist, but this worked superbly at any rate, I just used a piece of HSS I had ground, actually for steel but it worked superbly on this aluminium.

 

[Hood]

Is there any way to determine the grade? I doubt there is for the home shop hobbyist, but this worked superbly at any rate, I just used a piece of HSS I had ground, actually for steel but it worked superbly on this aluminium.

A nice sharp edged positive rake is usually a good tool for Aluminium so HSS lends itself well to that.

 

[indy4x]

Where are the good, or any Junk Yards in South Wales ?

They are about tho and had a few Billy bargains

 

[Farside]

Not welding-related, but I acquired this piece of audio processing gear a couple of weeks ago...
Behringer Xenyx 802

Then, thinking I REALLY needed a bit better, I got this...
Behringer MDX2100


But, realising that even the two of them didn't quite do what I wanted, I got this today...
Behringer VX2496


That might do it.
The reason? To try and make the best out of the horrible audio quality of speech radio, as she is transmitted.
None of these were new, of course, and I've spent far less than I'd thought I might need to. There's a load of decent-enough
home-studio audio gear around cheap as chips these days.

 

[indy4x]

Popped round the BIL place and came home with this lot



Following my recent acquisition of a D3, new set of Delphi brakes, as fitted to the D3 V8 to improve my TDV6 stopping power



The Ali was free, unfortunately the V8 brake conversion was a bit more spendy

 

[slim_boy_fat]

Popped round the BIL place and came home with this lot

He's worth keeping in with!

 

[Maker]

I believe my Grandad bought it new, lent it to my cousin a few years ago before he became a mechanic but being imperial, he never really used it so it hasn't been touched for a while.


The speed brace would appear to be a little crooked and the ratchet is atrocious (probably about 36 clicks per rev and very loose) but the sockets are all lovely and will see plenty of use in the garage.

 

[Kayos]

Popped round the BIL place and came home with this lot

View attachment 148347

Following my recent acquisition of a D3, new set of Delphi brakes, as fitted to the D3 V8 to improve my TDV6 stopping power

View attachment 148348

The Ali was free, unfortunately the V8 brake conversion was a bit more spendy

What size are the V8 discs?

 

[Dieselman 63]

Free shelf at uni came up trumps today - Sidchrome (made in Australia) 5/8 spark plug socket and a Stanley USA 12” rule which I buffed clean

 

[indy4x]

@Kayos they are 337mm, you need 18" wheels to clear them

 

[Chillitt]

Didn't actually need another one but I couldn't just leave it there..

 

[steve_s]

Did a bit of skip diving and got this lot layed it out 5 1/2 sheets 75 mm so going to insulate under dining room floor thats about £175 to buy and also go a stack of floor boards to keep the log burner going in the winter