Today I acquired...........

[angellonewolf]

new soldiers on the front wall that was hot doing that


oh and now cut hedge as well

 

[slim_boy_fat]

I could be inocent of this

Yeah, right.......

 

[eLuSiVeMiTe]

might have bought another drill the other night View attachment 185801
Now why do I need this
.
.
.
.
.
.
.
Its was a 5 quid not working battery had a little charge when was put in charger not charging
Took apart the charger a blown fuse in the charger not the plug new fuse £3 for 10

All working

Have a similar Bosch to that. 2 speed driver Ten years with infrequent use and the batteries are still spot on. Great for kitchen fitting and tight gaps

 

[dobbslc]

^^ I've got 3 of them! Really good little drills and I think better than the 18v ones.

 

[Dieselman 63]

Finally, the fixed steady for my Bantam. Thanks to @Seadog for acting as a freight forwarder (again). It has a broad arrow and some letters seemingly etched onto the top. Any military buffs have any ideas what this could mean?

 

[Dieselman 63]

Also I forgot about these two!

A box of cotter pins, and a Footprint fabricated pipe vice, started cleaning it and it’s looking good. Doesn’t need to shine, just need the rust and gunk off it for now.

 

[Moose McAlpine]

After seeing TYA's paraffin lamp i had to get my own. Beautifully made and such a "classic" timeless design. As good as modern LED lights are, there's something very satisfying about using this.

 

[steviec_lj]

A load of golf bats, a carrying thingy and some balls.

No idea how to use them but the eldest lad has shown an interest in it, so seeing as they were on the lawn near a collection “FREE to good home” I obliged

 

[Seadog]

Today I acquired this

To go with this

And it works At least the display powers up, so pretty confident it'll be fine.

Thanks to @cheb for the VFD and @Hood for the panel. Now, if only I wasn't in the middle of ripping my living room floor up, I could have a play with the VFD and my recently acquired Ingersoll-Rand compressor It'll keep.

 

[bigegg]

a henley block.
a 100a isolator
some 25mm meter tails.

<note to yorkshire electric : for a sculpture. >


plus this:


a genuine e3d v6 "volcano"
hot end for my printer.

still sorting settings out, but best guess, its running at least 6x faster. - 10minutes for a "fast print" test piece, instead of an one hour+

 

[The_Yellow_Ardvark]

Today I acquired a confusion.
A big confusion.
A whole bundle big boxes.
Addressed to me.
From "John".
I only know 3 John's.
One has denied it.
One I am waiting on to reply.
The other could of carried them to me.

Pictures of the bundle to follow, when I get home.

 

[The_Yellow_Ardvark]

Part 1.



I am still confused.

But I have undone the 7 box's from "John".
I am still waiting on a reply from one "John" I know. The rest are in the clear.

This is what I got. It is rather uncanny, that some bits I do need. Or have expressed an interest in getting.
"I an interested in getting a metal working lathe" ( I wonder if that will yield results?)




Hex Bit extender. MOD stamped as well. I needed one of theses back in January.



A "Unique Electrical Slide Rule". Never heard of this before or mentioned it.




Another Cobblers hammer, yes I did mention that a suitable item was needed, back in Easter. But since then I got my self one




A Sandvick Style Axe head. I do not need any more axes, but a few years ago I got hold of a 1kg head and now I have its baby brother.






A Telecom Multi-meter, no test leads, not looked into it. But we will see.






But I have a name...............

.

 

[The_Yellow_Ardvark]

Part 2.

This is the rest.

So far, so good.



1/4 BA Socket set. Complete.
I needed 8,9 and 10 BA for another set I have.



Forester Bit set, brand new, no makers name, but then again I have not looked.


Finally.

@mrsbruce Please carry on, when out patients arrive, this one will be used on another AVO I have with out a case.
I am really suspicious now.



Don't think the warranty is valid through.

 

[eLuSiVeMiTe]

Another tracksaw.
Cordless this time.
Many thanks @HughF packaged superbly and no damaged didn't expect it to arrive so quickly. Got some new foam strips left over in the garage from my festool rail refirmb so il clean em up and be as good as new.

Fingers crossed the clamps fit my green rails too.

 

[The_Yellow_Ardvark]

AAAAARRRRRRGH.
Parcel No 8 & 9.

This is no longer funny.

Useful, but concerning. The courier understood my worries and has been in contact with his office to see if they can help with who is sending this. I hope they can.



Axe and hammer shaft, yes they will fit the items received today.

 

[HughF]

Another tracksaw.
Cordless this time.
Many thanks @HughF packaged superbly and no damaged didn't expect it to arrive so quickly. Got some new foam strips left over in the garage from my festool rail refirmb so il clean em up and be as good as new.

Fingers crossed the clamps fit my green rails too.
View attachment 185994 View attachment 185995

I'm glad it arrived safe and sound.... Hope it serves you well. I keep thinking about replacing it but every time I use my skill77 I'm reminded how every track saw has the blade on the wrong side

 

[eLuSiVeMiTe]

I'm glad it arrived safe and sound.... Hope it serves you well. I keep thinking about replacing it but every time I use my skill77 I'm reminded how every track saw has the blade on the wrong side

Have two cordless skillys. Ones lh ones Rh.
Covered for all occasions.
Tbh I prefer the blades rhs. Pita trimming a few mm off the end with the base on the wrong side. Feels cack handed to me the other way.

Spent too many years using them that way.

Only reason I reach for a skilly these days is to rip strips with the Fence.
Something a TS isn't much use for.

 

[The_Yellow_Ardvark]

Just got this today.

I confess, not for me. Not happy about that.
As it will be no where near me when it is in use.

But I knew this was due.

Photos are from the friend who is brought it and needed a main Land UK address to have it sent to.

 

[RichardM]

One of these arrived today, £33.98 delivered

 

[slim_boy_fat]

An assortment of taps, £12 + p&p off the 'Bay. Haven't examined them all yet but they look to be in good nick.