Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 17,993
- Location
- East Yorkshire
- Thread starter monkeymark
- Start date
DAPPH
as dyslexik as I'm daft
- Messages
- 7,054
- Location
- Near to Cross Hands Llanelli SouthWales GB
When you get the flexi duct I might have to ask you a few questions about it, mostly regarding the flexibility & strength. I want to connect the the dust extractor at the Men's Shed & I'm trying to find something suitable to go to the portable machines. You can buy proper extractor flexi duct but it's a crazy price, that stuff is a lot cheaper.
Normally such ducting should all be metal based and earthed out . Should anything happen untoward and a claim is in the offing the insurers will go to town big time to prove it was your fault .
You might need to think of a hose with a fixed bare copper grounding wire running through itand the same within the pipe work ie all joints connected with a earthing strip so you don't get a near fatal static electricity build up and /or an explosive discharge / ignition in the pipes & outside when there is the right amount of dust to air ratio. It happened in the carpentry unit adjacent to our plant hire business ..the explosion & fire took out several other units in the same block as well .
See" explosion at the flour mill " for an example of what a static or spark dust explosion can do.
This govern publication tells of wood dust fires in air extraction equipment
http://www.hse.gov.uk/pubns/wis23.pdf
Perry Owens
Member
- Messages
- 793
At the moment £249.88 with free delivery.
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 17,993
- Location
- East Yorkshire
Thatsa lot of beer tokens, but worth ever penny. My dad used to make me weigh out hundreds of rounds said it was payment for letting me use the .300Win Mag.
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
Welding electrodes , silver solder , .Bitsa junk..
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
Hayling Wednesday beach sale , an old Draper grease gun.
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
The clamp fits on my brass-junk hastily made
but beautifully crafted mini copper pipe bender 
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,658
- Location
- Going Away.
As I said.
The damaged to my blower.
It was a bit warm.
I have posted in the past, I was attempting to melt steel.
first attempt at steel was to hot.
But I did managed to cast enough metal to make a hammer.
The damaged to my blower.
It was a bit warm.
I have posted in the past, I was attempting to melt steel.
first attempt at steel was to hot.
But I did managed to cast enough metal to make a hammer.
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
Fascinated by that , any chance of a pic of the hammer ?
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,658
- Location
- Going Away.
Yes, there is a chance, no community chest through.
.
.
.
.
.
Yes it is simple.
Yes it is crude.
But for a cast lump of steel, with a hole in it. Plus a successful cast at home it is not bad.
Pitting, may be from the damp in the mould. But I have had damper moulds since.
Metal, could be, it was from a wrecked Fiat engine. Plus it was a mixed grade metal.
Would I cast steel again at home.
No.
Have I done it since at my bigger place?
Yes.
For the simple reasons I have nice neighbours.
As a prove of concept it worked.
Plus it cost me only the power for the fan and the outside lamp.
slim_boy_fat
Forum Supporter
- Messages
- 29,540
- Location
- Scottish Highlands
slim_boy_fat
Forum Supporter
- Messages
- 29,540
- Location
- Scottish Highlands
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
That'll be handy, should you ever want to make a sea-horse........
coat >> door
Dohhh.... grandkids have just turned up for two nights : (
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,658
- Location
- Going Away.
Today I acquired.
1. A place to chat before a drive home. Thank you @DAPPH
2. Plastic bags.
3. A Machine vice.
This was given to me to allow me to help others. To that end I plan to lend it to a Mini Shed, to allow others to start a tool collection.
4. A Bucket of turn able plastic.
Ideas have bean muted on their future. It is looking bright.
Finally I acquired some hands on knowledge on how to get the best from a Tilley.
@DAPPH Your help and experience showed me abetter way to light this beastie.
1 pump, it worked.
You can just see the new mantle burning and going white.
Taken from a distance as the body had developed a new leak.
But we were ready to act if it went wrong.
1. A place to chat before a drive home. Thank you @DAPPH
2. Plastic bags.
3. A Machine vice.
This was given to me to allow me to help others. To that end I plan to lend it to a Mini Shed, to allow others to start a tool collection.
4. A Bucket of turn able plastic.
Ideas have bean muted on their future. It is looking bright.
Finally I acquired some hands on knowledge on how to get the best from a Tilley.
@DAPPH Your help and experience showed me abetter way to light this beastie.
1 pump, it worked.
You can just see the new mantle burning and going white.
Taken from a distance as the body had developed a new leak.
But we were ready to act if it went wrong.
Arc Tourist
Member
- Messages
- 4,896
- Location
- Wales
Do you also do full uniform prep on your cases for 1/10th grain powder consistency to be worthwhile ?
- Messages
- 22,293
- Location
- Birmingham
Digital scales, luxury
I've still got my mechanical scales and powder thrower in the loft.
Farside
Badly Welded Man
- Messages
- 5,760
- Location
- Ireland
When you get the flexi duct I might have to ask you a few questions about it, mostly regarding the flexibility & strength. I want to connect the the dust extractor at the Men's Shed & I'm trying to find something suitable to go to the portable machines. You can buy proper extractor flexi duct but it's a crazy price, that stuff is a lot cheaper.
Will do, once I get it installed. I'll probably make a couple of sheet metal ends to slip over the exhausts to prevent undue wear and tear on the flexy. Like you, I've been gobsmacked at the prices of the proper stuff. If this stuff lasts for a few years it's cheap enough to replace.
A couple of years back I missed out on some ex-MoD pukka exhaust extractor flexies at one of the surplus places. Usual story, skint when it came up.
