Chamfering tool - any good?

[JMS1972]

Saw a video about these today looks like it might be good for weld prep:

Chamfer tool

Seem to for 42 quid and upward on fleabay anyone used one?

Fleabay link

 

[awemawson]

Looks pretty capable. Would be good for plate preparation for welding as well as cosmetic bevelling.

 

[Seadog]

I'd want a good few spare cutters, though.

 

[JMS1972]

I'd want a good few spare cutters, though.

They are the relatively cheap triangular type though so you get three bites of the cherry...

 

[AndersK]

Looks a lot easier than rigging the wood router with a chamfering bit.

 

[grim_d]

Had to bevel a bunch of 80x15mm flat bar today....oh how I longed for a Metabo bevelling tool.

So thanks.....one of these little jobbies are on the way to me.

 

[JMS1972]

Had to bevel a bunch of 80x15mm flat bar today....oh how I longed for a Metabo bevelling tool.

So thanks.....one of these little jobbies are on the way to me.

Can you do a review I'm very tempted

 

[grim_d]

Can you do a review I'm very tempted

Do you not believe the man from YouTube?

 

[8ob]

Do you not believe the man from YouTube?

Noooooooooooooooooooooooooooooooooooooooooooooooooooo
Thats done it, there will be a you tube vid on not believing the man on you tube coming your way very soon

Bob

 

[8ob]

Is this the same tool ? https://www.ebay.co.uk/itm/22447374...PMt%2FJkqLIv2Q%3D%3D|ampid:PL_CLK|clp:2047675

Bob

 

[grim_d]

Is this the same tool ? https://www.ebay.co.uk/itm/224473740001?_trkparms=aid=1110006&algo=HOMESPLICE.SIM&ao=1&asc=233036&meid=987eb454ebee473499810c3acb0ebf60&pid=101195&rk=1&rkt=12&sd=353517853100&itm=224473740001&pmt=1&noa=0&pg=2047675&algv=SimplAMLv8MlcUltbPairwiseNativeDarwoXgbV1&brand=Unbranded&_trksid=p2047675.c101195.m1851&amdata=cksum:224473740001987eb454ebee473499810c3acb0ebf60|enc:AQAGAAACEEeIjgwJX2VD%2BM%2BH%2BgDKa1DHNT271RMPt4XSwQFkbQ9XbbcET27QxzJPcCKxh7pEgmGUESzrN8qhRhYBANWtjboIR%2Byc55qT47aA1AxtjMqC708%2FSQ95kE9ymDMo04v0RWMa4D5ICxw7hG%2Bn4M%2FP2K72%2F6gZxIRlWUVZroxdzCbzo47NDI%2FmPpYgoYgILbryl2gENqDCwO0%2BAGYRblrPaF4UpjCURel5bd%2FwzJGy3fXd0Z2lwy0Q0mwjEfaNWYGfJYFbRKQb7qT%2FmTXw7hKBVadi10kxpiMM6YKLMp4ATYRdUF0u%2FgTXIwbAV1FUPHn%2B4%2BNVAXdA4JKxKxEobrfBt4ClTOinmtjUsfgQBKp%2FDGQrWWoIyXColevMzG2pp4qOQH%2FxwmQfOUfLJhEIr5sPkbA1GB6bsO%2Fyah7w9wr4rdolKnkPZ%2Fl68bGKo4ipdkmNitq7bCu4YwaqKFMMukJrflHG1LkxYnbQinAUiyvkXnnJbgXdns0BVk5BdW2CY0V42KqIS7ZEO5t20kTbKT%2Fnj%2BO2MT2pW36S%2FMnNT8oBzHT5%2BIgIWLmkI8ffurGtLYBihjQGSLw6MkpVCEbs6mC0Pdb%2B8vPVpvC5Xt65k8wh98SWfxnx7Fibcmu7bDJ%2FvxXvW%2Bwu6qvEVGqYS%2FfC%2FySP22FdU%2Bn2839xGeme37yfPQIpGdC94K9NBVPMt%2FJkqLIv2Q%3D%3D|ampid:PL_CLK|clp:2047675

Bob

For £3 more

 

[8ob]

For £3 more

Not worried about that, it was offering the replacement bits. Seemed reasonable.

Bob

 

[grim_d]

Not worried about that, it was offering the replacement bits. Seemed reasonable.

Bob

The price is good for tips.

TPMT080204 for reference.

(Edited for typo)

 

[Hood]

The price is good for tips.

TMPT080204 for reference.

You sure it is not TPMT? Don't recall there being a clearance angle designated with M.

 

[grim_d]

You sure it is not TPMT? Don't recall there being a clearance angle designated with M.

It would seem your reading is somewhat better than my typing.

 

[E T]

Looks pretty capable. Would be good for plate preparation for welding as well as cosmetic bevelling.

Cosmetic bevelling yes. Weld prep no.
This thing is only capable of very small chamfers for cosmetic purposes(chamfer depth 0.1-0.9mm). It will never do a 30 degree bevel on 10 or 15mm plate for weld prep.
And judging by the cost and the origin it will probably go whizz, pop, bang after two weeks of use.

 

[8ob]

The price is good for tips.

Stuck a tool and replacement tips in my basket, they normally come back with a discount if you dont proceed with the payment,

Bob

 

[nickk]

Be interested to hear follow up report of this tool from real life/people situations.

 

[Hood]

Be interested to hear follow up report of this tool from real life/people situations.

Buy me one and I will tell you if you should waste your money buying another for yourself

 

[Moose McAlpine]

Saw a video about these today looks like it might be good for weld prep:

Chamfer tool

Seem to for 42 quid and upward on fleabay anyone used one?

Fleabay link

He sees, he likes, he buys.

Thanks!